will post pictures shortly!
FS: 3sgte intercooler piping for swap - 6G Celicas Forums
*will include that blue 45degree coupler*
open to reasonable offers, there right from jgreenings swap, i never used them.....
bump for a good deal. These pipes worked great when I had the ct-26. Intercooler is from an Isuzu diesel truck which you can pick up for $100-$200 used either ebay or junk yards. You want the one that has 19x14 dimensions. Other intercoolers will also work with some modifications. Essentially, you can have a FMIC that will support more than 400whp for about $300-$400 bucks.
QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.
thank you for your input jay!!!!
(not actual picture!)
i have clamps i can include or sell separate as well!
worm style, made by tridon. 12total, make offer!
hang on, Will these fit a 7a w FMIC?
>
no but if you wanted im sure theres enough piping to cut and paste it to make it work for you
that shorter silver pipe would be fine in the DR side corner, than cut up the others to fit.
This post has been edited by zipstrips: Aug 2, 2006 - 11:23 AM
QUOTE(FallenHero @ Aug 2, 2006 - 8:38 AM) [snapback]464472[/snapback]
>
hang on, Will these fit a 7a w FMIC?
hang on, Will these fit a 7a w FMIC?
no but if you wanted im sure theres enough piping to cut and paste it to make it work for you
that shorter silver pipe would be fine in the DR side corner, than cut up the others to fit.
This post has been edited by zipstrips: Aug 2, 2006 - 11:23 AM
bump, gotta sell, will entertain reasonable offers......
$75 shipped to canada?
>
make it 150 shipped and i'll consider. 75 is kinda insulting thou. thanks
QUOTE(Valo666 @ Aug 3, 2006 - 4:53 PM) [snapback]465092[/snapback]
>
$75 shipped to canada?
$75 shipped to canada?
make it 150 shipped and i'll consider. 75 is kinda insulting thou. thanks
have you seen how much it costs to ship across the boarder?..its expensive man...and hey..you said you will entertain reasonable offers..and if i wanted to get rid of somethin..i would take any offer i got that i found to be decent.
>
right it is expensive to go across the boarder, exactly why im not gona sell them to you for 75 shipped. im more than likely going to take a loss here but im not going to sell my self that short either. thanks for the offer but it not very reasonable.
This post has been edited by zipstrips: Aug 4, 2006 - 1:16 AM
QUOTE(Valo666 @ Aug 3, 2006 - 9:22 PM) [snapback]465205[/snapback]
>
have you seen how much it costs to ship across the boarder?..its expensive man...and hey..you said you will entertain reasonable offers..and if i wanted to get rid of somethin..i would take any offer i got that i found to be decent.
have you seen how much it costs to ship across the boarder?..its expensive man...and hey..you said you will entertain reasonable offers..and if i wanted to get rid of somethin..i would take any offer i got that i found to be decent.
right it is expensive to go across the boarder, exactly why im not gona sell them to you for 75 shipped. im more than likely going to take a loss here but im not going to sell my self that short either. thanks for the offer but it not very reasonable.
This post has been edited by zipstrips: Aug 4, 2006 - 1:16 AM
saturday morning bump!
ttt.........
open to offers!?
bump
bump lol.. this seems hopeless....
hey i gave you my offer..lol
pm sent
still for sale.... any offers
how about you make me an offer to 98208 WA state?
94' ST Coupe - 5sfe Motor swap and brake swap.
how much is piping usually run anyway if i didnt want to buy your piping (trying to compare) im eyballing your sale.... 
QUOTE (Galcobar @ Oct 15, 2008 - 2:44 AM)You want power but have no money. That's a problem.Cheap. Reliable. Fast. Pick two.
piro, it can be anywhere from expensive to cheap depending on how you set it up.. i would talk to tweak and ask for a list of bends he plans on using on your car then shop aroun 
thanks man. i will call him again tomorrow...i KNOW he s gettin tired of me! lol
i don think hes going to do alot of bends because of the way he set up the guys swap he just did this week....
This post has been edited by easternpiro1: Aug 23, 2006 - 10:25 PM
s gettin tired of me! lol i don think hes going to do alot of bends because of the way he set up the guys swap he just did this week....
This post has been edited by easternpiro1: Aug 23, 2006 - 10:25 PM
QUOTE (Galcobar @ Oct 15, 2008 - 2:44 AM)You want power but have no money. That's a problem.Cheap. Reliable. Fast. Pick two.
>
well instead of using this piping like i planned i used my old spearco IC i had and got the greddy 60mm piping kit. didnt like there couplers, and i wanted tbolt clamps.. spent prolly around 400 for that. am working on a 3' turbo inlet with PCV fittings, and a rec. BOV line with that cost aswell... i purchased a welder so i could do my own work ($440) plus a bottle w/ gas ($100~) im sure there is an added cost somewhere else too that i missed
QUOTE(easternpiro1 @ Aug 23, 2006 - 8:18 PM) [snapback]472225[/snapback]
>
how much is piping usually run anyway if i didnt want to buy your piping (trying to compare) im eyballing your sale....
how much is piping usually run anyway if i didnt want to buy your piping (trying to compare) im eyballing your sale....
well instead of using this piping like i planned i used my old spearco IC i had and got the greddy 60mm piping kit. didnt like there couplers, and i wanted tbolt clamps.. spent prolly around 400 for that. am working on a 3' turbo inlet with PCV fittings, and a rec. BOV line with that cost aswell... i purchased a welder so i could do my own work ($440) plus a bottle w/ gas ($100~) im sure there is an added cost somewhere else too that i missed
bump!
bump
hey i have a 95 hatch to and mounting a fmic mins 24 inch tho if this piping will work i offer 85 with shipping to hamilton nj 08619
>
pm sent... see page one for sizing info. i never installed these due to making my own when it came time. my paypal is zipstrips@aol.com once i see payment it will get sent ASAP!
QUOTE(2slow2nervous @ Sep 8, 2006 - 7:41 PM) [snapback]477711[/snapback]
>
hey i have a 95 hatch to and mounting a fmic mins 24 inch tho if this piping will work i offer 85 with shipping to hamilton nj 08619
hey i have a 95 hatch to and mounting a fmic mins 24 inch tho if this piping will work i offer 85 with shipping to hamilton nj 08619
pm sent... see page one for sizing info. i never installed these due to making my own when it came time. my paypal is zipstrips@aol.com once i see payment it will get sent ASAP!