Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #39891

polyurethane motor mount INSERTS! - 6G Celicas Forums

Topic #39891 243 posts Started by lagos
kirkosaurus
#151
>
QUOTE(volcanoboy @ Jan 14, 2008 - 9:12 AM) [snapback]630688[/snapback]
>

Ok i have a gt4 3sgte will these engine mounts work on my car and how can i order them please i am in desperite need of some of them



Did you read Lago's post you just quoted? All the info is there. smile.gif







Also just found out that the inserts for the 90-93 will also fit the 86-89 GT and GTS, so we have them for all 86-99 Celica's with the 7AFE, 5SFE, 3SGE and 3SGTE engines. smile.gif
---Kirk's MK1.5 webpage---Urethane motor mount inserts for theMR2andCelica$55 shipped
massbrandon
#152
Kirk, can I just send money via paypal and then you send them out to me? Just wanted to touch base with you before I send ya some money
kirkosaurus
#153
>
QUOTE(massbrandon @ Jan 15, 2008 - 1:14 PM) [snapback]631012[/snapback]
>
Kirk, can I just send money via paypal and then you send them out to me? Just wanted to touch base with you before I send ya some money


that's how it works. smile.gif

thanks,
-kirk
---Kirk's MK1.5 webpage---Urethane motor mount inserts for theMR2andCelica$55 shipped
BriinumsBo
#154
so the pros are better feel and stuff. what are the cons? jsut the vibration? isnt this bad for engine? of for chassis? I`m not sure what has been done, but after engine rebuild on my celica st185 there is so much vibration in the car that some plastic parts start to rattle. and if i push the gas pedal while in 4th gear and at ~1500rpm, the car vibrates really terribly.. would this help?

P.S. i havent installed the inserts, but just planning wether its worth.

This post has been edited by BriinumsBo: Feb 6, 2008 - 3:48 AM
1994 MR2 SW20, 1990 Celica ST185, both 3SGTEturbo celica|celica club .eu|celica gt4|imports|Toyota GT 86|Scion FR-S|Subaru BRZ
bslik
#155
i think i need some, my engine slams hard and loud every time i shift
bslik
#156
just sent the money yesterday... hope i could get them on soon biggrin.gif
kirkosaurus
#157
>
QUOTE(bslik @ Mar 4, 2008 - 6:30 PM) [snapback]649285[/snapback]
>
just sent the money yesterday... hope i could get them on soon biggrin.gif


You should have them before the weekend! smile.gif
---Kirk's MK1.5 webpage---Urethane motor mount inserts for theMR2andCelica$55 shipped
revski
#158
if the motor mounts will fit my st then i will order them in 2 or 3 weeks
94TRDcelica
#159
Mine are going on this weekend - Ill let you all know I get on and the difference they make!
kirkosaurus
#160
>
QUOTE(revski @ Mar 5, 2008 - 3:37 AM) [snapback]649420[/snapback]
>
if the motor mounts will fit my st then i will order them in 2 or 3 weeks


As the website states, they fit the GT and ST
---Kirk's MK1.5 webpage---Urethane motor mount inserts for theMR2andCelica$55 shipped
bslik
#161
thanx that was fast, just got mine today... gonna put them in this weekend hopefully
bccentaur3
#162
I got them maybe a month ago, and it was really fast shipping. Too bad I haven't started my car yet, but we will find out, how well they work soon. smile.gif
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
94TRDcelica
#163
Ive just instaled mine and wow - what a difference they make!

You feel much more connected to the engine and on start up the car doesn't wobble at all, just soothingly vibrates a bit more. Shifting quickly is much more responsive and everything just feels so much more together!

I had a new clutch put in whilst doing the motor mounts, now it feels light on the clutch but at the same time bites well and gear shifts are smooth and consistent! Love em!

The only negative thing i'dasy is when almost ideling in second/almost rolling the car shudders quite alot, but that's probably partially me needing to go to first instead of dipping the clutch like I have a natural tendancy to do because the old one was so bad! LOL!

Harold_Fastwaker
#164
>
QUOTE(Batman722 @ Sep 9, 2006 - 11:23 PM) [snapback]477963[/snapback]
>
no problem Kirk smile.gif here they are. Right now I don't know if the MR2's auto mount is the same as ours but i will find out tomorrow when my EPC is back.

the auto mount is on the left in all of the pics.


notice the auto shifter cable bracket on the auto mount ^^





Kinda weird they use different inners as they are interchangeable mounts. I am running the auto mounts on my ST right now after I did my trans swap. Only thing different was the side transmission mount.


I guess I'll be doing a little bit of trimming here to make em fit.
:.....Flush Wheel Fitment Guide.....:
GotToyota
#165
If I were to get a set of these, how do you install them? Do you have to take out the motor mounts to get them in?

-Matt
kirkosaurus
#166
>
QUOTE(GotToyota @ Mar 13, 2008 - 10:20 AM) [snapback]653201[/snapback]
>
If I were to get a set of these, how do you install them? Do you have to take out the motor mounts to get them in?

-Matt


If you'll read the very first post there's a link to the installation video.
---Kirk's MK1.5 webpage---Urethane motor mount inserts for theMR2andCelica$55 shipped
GotToyota
#167
>
QUOTE(kirkosaurus @ Mar 13, 2008 - 11:24 AM) [snapback]653206[/snapback]
>
>
QUOTE(GotToyota @ Mar 13, 2008 - 10:20 AM) [snapback]653201[/snapback]
>
If I were to get a set of these, how do you install them? Do you have to take out the motor mounts to get them in?

-Matt


If you'll read the very first post there's a link to the installation video.

Oh, didn't see it. Thanks friend. smile.gif
GotToyota
#168
EDIT: Saw it on page 2. Are these still available?

This post has been edited by GotToyota: Jul 3, 2008 - 2:31 AM
cjh4l22
#169
x2
proud =3sgte SWAPPED= '95 Celica ST owner [calling it the GT2 or half-trac]309,000 miles n' ....dead-> ALIVE AGAIN!! ~14,000 miles driven
d3vil_celica
#170
hey those this mount fit on a 95 celica st and will it fit for a swap 3sgte or just the trans
kirkosaurus
#171
>
QUOTE (GotToyota @ Jul 3, 2008 - 2:19 AM) *
>EDIT: Saw it on page 2. Are these still available?



Yes they are.
---Kirk's MK1.5 webpage---Urethane motor mount inserts for theMR2andCelica$55 shipped
Batman722
#172
do you have one for the st205 rear mount ?
my st205 swapandour Beams swap
kirkosaurus
#173
>
QUOTE (Batman722 @ Jul 3, 2008 - 10:17 AM) *
>do you have one for the st205 rear mount ?


The inserts are sold in sets for both front and rear mounts.
---Kirk's MK1.5 webpage---Urethane motor mount inserts for theMR2andCelica$55 shipped
Slick
#174
>
QUOTE (kirkosaurus @ Jul 3, 2008 - 5:20 PM) *
>>
QUOTE (Batman722 @ Jul 3, 2008 - 10:17 AM) *
>do you have one for the st205 rear mount ?


The inserts are sold in sets for both front and rear mounts.


Since you have them for the ST205, I'm assuming you have them for the ST202 (not that they are the same or anything)?
"Remember, amateurs built the ark and professionals built the Titanic. Butrevolutionariesbuilt the Celica!"- Me
Batman722
#175
>
QUOTE (kirkosaurus @ Jul 3, 2008 - 11:20 AM) *
>>
QUOTE (Batman722 @ Jul 3, 2008 - 10:17 AM) *
>do you have one for the st205 rear mount ?


The inserts are sold in sets for both front and rear mounts.

sorry I'll be more clear.
Do you do the st205 front and rear mounts ? the front is the same pattern as the GT/ST I believe so I figured you would have that. The rear mount rubber pattern is different than the GT/ST mounts which is why I asked.

?
my st205 swapandour Beams swap
kirkosaurus
#176
>
QUOTE (Batman722 @ Jul 3, 2008 - 3:15 PM) *
>>
QUOTE (kirkosaurus @ Jul 3, 2008 - 11:20 AM) *
>>
QUOTE (Batman722 @ Jul 3, 2008 - 10:17 AM) *
>do you have one for the st205 rear mount ?


The inserts are sold in sets for both front and rear mounts.

sorry I'll be more clear.
Do you do the st205 front and rear mounts ? the front is the same pattern as the GT/ST I believe so I figured you would have that. The rear mount rubber pattern is different than the GT/ST mounts which is why I asked.

?


Is the ST205 different from the ST165/185? If you can supply pictures I could probably tell you.
---Kirk's MK1.5 webpage---Urethane motor mount inserts for theMR2andCelica$55 shipped
darksecret
#177
I'm not sure if this is inappropriate for this thread but I just got my car back from a mechanic and the idiot lost my rear mount bolt, anyone know a retailer that has a replacement or would I be stuck searching junk yards?
easternpiro1
#179
wow... dark! you been away for years but not that long! tongue.gif
QUOTE (Galcobar @ Oct 15, 2008 - 2:44 AM)You want power but have no money. That's a problem.Cheap. Reliable. Fast. Pick two.
lagos
#180
>
QUOTE (darksecret @ Dec 27, 2008 - 6:29 PM) *
>I'm not sure if this is inappropriate for this thread but I just got my car back from a mechanic and the idiot lost my rear mount bolt, anyone know a retailer that has a replacement or would I be stuck searching junk yards?


I don't understand why people cant comprehend the simple fact that their local toyota dealer can get them every nut, bolt and replacement part for the car.
And yes, this is the wrong thread for this.
15PSI - 30MPG - Megasquirt Tuned
← Back to Topics

Page 6 of 9 (243 total posts)