Over 1M Posts • 84K Topics • 9K Authors

FS: st185-RC clip - 6G Celicas Forums

Topic #39947 16 posts Started by 94_st_hatchback
wow, im seriously thinking about it. just emailed him about shipping to new york and if he did a compression test

This post has been edited by Jdog1385: Aug 4, 2006 - 12:55 PM
>>Gah I hope some of those will still be around by the time I get to the age that i can afford one. laugh.gif

~FlamingCelica>
>

94 Red Celica ST
Wow, im seriously surprised that this hasnt gotten closed yet.

Cuz Thats How Us Country Boyz RollGrowing up racing motocross, i learned one thing..."Always wear clean underwear, you never know when the Paramedics are gonna have to cut your pants off of you"
>
QUOTE(6th_celi_vert @ Aug 4, 2006 - 2:17 PM) [snapback]465482[/snapback]
>
Wow, im seriously surprised that this hasnt gotten closed yet.


Why would it be closed?

QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.
I remember a F/S thread while back relating to the 5th gen that got closed stirring up some heated argument.

But then again, its got a 3SGTE...it'll prolly slide.

Cuz Thats How Us Country Boyz RollGrowing up racing motocross, i learned one thing..."Always wear clean underwear, you never know when the Paramedics are gonna have to cut your pants off of you"
>
QUOTE(6th_celi_vert @ Aug 4, 2006 - 3:39 PM) [snapback]465500[/snapback]
>
I remember a F/S thread while back relating to the 5th gen that got closed stirring up some heated argument.

But then again, its got a 3SGTE...it'll prolly slide.

it'll prolly slide? It's the most common swap for the 6th gen.... People generally use the st185 (5th gen) 3sgte and not the st205 (6th gen) everyone I know that went 3sgte besides celiman05 uses the st185
art
erik
jeff
itchy
fastbird
jay
etc
>
QUOTE(dustin15brown @ Aug 4, 2006 - 2:52 PM) [snapback]465512[/snapback]
>

People generally use the st185 (5th gen) 3sgte and not the st205 (6th gen) everyone I know that went 3sgte besides celiman05 uses the st185
art
erik
jeff
itchy
fastbird
jay
etc


Actually, mine came from an SW20....not an ST185 biggrin.gif

QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.
$2500 is a little steep for a st185 3s even if it is an rc.
>
QUOTE(Rjb23 @ Aug 4, 2006 - 4:48 PM) [snapback]465555[/snapback]
>
$2500 is a little steep for a st185 3s even if it is an rc.


it has all the body panels, and they look to be in great shape, considering. also, it has the whole rear end...2500 is a very good price for this. you could make a lot of that back by selling off that Carlos Sanz front end..

AIM==Mynzeyes
>
QUOTE(jgreening @ Aug 4, 2006 - 4:30 PM) [snapback]465553[/snapback]
>
>
QUOTE(dustin15brown @ Aug 4, 2006 - 2:52 PM) [snapback]465512[/snapback]
>

People generally use the st185 (5th gen) 3sgte and not the st205 (6th gen) everyone I know that went 3sgte besides celiman05 uses the st185
art
erik
jeff
itchy
fastbird
jay
etc


Actually, mine came from an SW20....not an ST185 biggrin.gif



yes, thats what i was getting at

Cuz Thats How Us Country Boyz RollGrowing up racing motocross, i learned one thing..."Always wear clean underwear, you never know when the Paramedics are gonna have to cut your pants off of you"
Careful alot of shadey sellers come out of Washington. Especially those with hotmail accounts. Beware if you purchase this, use a credit card. It will give you a little more security.


If anyone get in contact with this seller. Please try to get the full name of the person you are speaking to and post it here. I had a problem with an importer from Washington. Just want to make sure its not the same company.

Good luck if anyone buys this.

I will return one day.
Also, since this is in the Northwest, potential buyers might want to check out http://www.nwstreetracing.com/nwsr/ for info about this shop before buying...they might have some on there.

New Toyota project coming soon...
somebody bought it already but seller definitely sounded shady...wouldnt even give me compression test numbers. heres the email he sent me;

HI!
This engine runs great with even compression!


Thanks,
Douglas
upgarageusa.com

sounds like somebody that has no clue whats going on and is just pushing this motor out of the shop.
hay guys, so I think it may be a shop I went to a wile ago for a 185 clip, ended up not buying it but the shop was lagit, if anyone wants me to, I'll go check it out and take pics, I'm in tacoma every weekend seeing my girlfriend so its not at all out of the way, may even check it out myself but I dont need to buy it smile.gif

well nm if its sold, yeah I'm pretty sure its the same shop I remember doug was his name, anyway yeah he is not so much of a talker and kinda not the best with motors but his mechanics are, they diff know what there doing. (when I went then there were doing a complete supra overhall, and were almost done with a skyline to 240 conv.)

This post has been edited by creis: Aug 7, 2006 - 9:19 PM