this was the topic of one of my previous posts, and thanks to the people who tried to help me out then, but i still don't know how to get the manual window crank off so i can take my door panels off. i know there's a C-clip type of thing i need to remove, but don't know where it is or how to remove it.

what i'm really looking for are some pictures of the inside of the door so i can get a better idea of how to do this.

i have the locks that you push one door's lock down and they both go down. they were screwing up, and i was told to spray WD40 in the actuators, but i don't know how to get the plugs out, probably because i can't get my door panel off all the way.

if anybody could provide me with some pictures of this actuator thing and the inside of the door that would be great.

hmm, on my old car i was told that you just use a like thin towel and kinda wedge a corner in there, and then you use it kinda like a saw. Suprisingly it worked for me , but this was on my old 94 sunbird(POS).

use a flathead screwdriver to pry it away a bit, then pliers to pull the closed end of the "C" straight away from the middle of rotation


looks something like this (arrow indicates direction the clip has to go)
<----C==O