Hi there,

have a similar problem as the guy before me, have ordered rotors for my 3SGE 2.0 from US, and when installing found out the rotors are smaller than stock ones. Actually the diameter is smaller, also thickness is different to the ones on my 2.0. They are a bit thinner.

Do you know exact sizes of brake rotors for 1.8 and EU/JAP 2.0, so I can exactly measure them and say, they fit EU 1.8 models too ? Cause i'm just guessing they'd fit the 1.8.

Here the rotors i bought
http://129.33.208.36/L1Rotors.jpg
and more info: http://www.nopionline.com/nopistore/dsp_pa...TOYOTA%20Celica

Appreciate any help. Thanks..

No idea anyone ? Any 1.8 Celicas around here ?

I don't know which one is bigger, thinner or anything... What I know is there were four types of front brake rotors:

1# 43512-20580
JDM 3SFE SS-I, Euro/US 7AFE ST
2# 43512-20590
Euro 3SGE GT, JDM 3SGE SS-II, JDM 3SGE vvt-i SS-III
3# 43512-20600
US 5SFE GT
4# 43512-20610
JDM/Euro 3SGTE GT-four

...and because those new rotors of yours are for ST models (it's written on that page), I belive that shoud be number one brake rotor (that means they are Euro/US ST and Japan SS-I aftermarket product)...

What I should do more is measure my Euro ST front rotors for you lately today...

EU GT Rotors : 275MM
EU Superstrut: 285MM (Not completly sure)
EU ST Rotors: 255MM

Thickness is the same of all the three.

This post has been edited by Kadett: Aug 10, 2006 - 12:52 PM

Kadett, thanks for the info, i measured them today,

US rotors I bought(front): 255mm/25mm

I found on web following rotors available in EU for Celicas 6thgen:
1.8 i 16V (AT200/ST) 255mm
2.0 i 16V (ST202/GT) 275mm

yeah the ST deffo has smaller disks than the GT