what bulbs do you need in the JDM tails?? i know the oem ones take 1157 and 1156s, but what about jdm? Im looking into gettin some bulbs for when i get mine b4 i leave my job.
JDM tail bulb #s - 6G Celicas Forums
you use the same wiring harness and bulbs
My JDM tails came with the bulbs and wiring harness...
7440 and 7443
http://www.6gc.net/forums/index.php?showtopic=28472
7440 and 7443
http://www.6gc.net/forums/index.php?showtopic=28472
Project ST204.5 99.88946% complete...
I used the same harnesss and bulbs
How'd you guys do that? The USDM harness uses a twist compared to the JDM push in.
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
It fits direct without problem, the only thing is that you will have an extra bulb, so I removed that bulb and that's it.
My JDM's also came with JDM harness and bulbs.
When I got my Currens they came with a harness & bulbs, which the bults are different (wedge type) but the USDM harness will fit fine.
MyFlickrMyeBay_Perpetual Aperture_
>
x2 ...no extra bulbs needed
QUOTE(Culpable04 @ Aug 14, 2006 - 9:26 PM) [snapback]468879[/snapback]
>
I used the same harnesss and bulbs
I used the same harnesss and bulbs
x2 ...no extra bulbs needed
No more replicas... This is evolution... This isSS-four:)________[Featured Celica of 6gc.net @ 2010]_________
My usdm harness wouldn't twist into the JDM tails. if I remember thats why i changed it.
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
yes I would, I did it less than a month ago on mine.
>
Unbelevable... seems another thing is different between USDM and UKDM/EDM versions... my wiring harness fits perfect w/o any change.
QUOTE(trdproven @ Aug 16, 2006 - 2:24 AM) [snapback]469386[/snapback]
>
My usdm harness wouldn't twist into the JDM tails. if I remember thats why i changed it.
My usdm harness wouldn't twist into the JDM tails. if I remember thats why i changed it.
Unbelevable... seems another thing is different between USDM and UKDM/EDM versions... my wiring harness fits perfect w/o any change.
No more replicas... This is evolution... This isSS-four:)________[Featured Celica of 6gc.net @ 2010]_________