Hi,
I have been trying for several weeks now but no luck:

I have a Celica ST205 GT4 and one of the Front Fog lights has blown so it needs changing. I tried to undo the bulb but it seems theres no way it can come out. I have tried unscrewing it, twisting it, pulling it, pushing it, yanking it and nearly gona smash it as it doesnt come out.

There is a screw just ontop of the panel where the fog light is, which i unscrewed but still no panels move or allow me to replace and take off the fog lights.

Anyone who has a ST205 will know what i am talking about but has anyone had success changing fog lights on the ST205, if so, please could you let me know as i have nearly battered my brains out trying to do it.

Thanks

This post has been edited by ST205racer: Aug 19, 2006 - 9:59 AM

remove the plastic trim peice, then remove the 2 screws holding the fog lamp to the bracket, pull the lamp toward you, pull out the cover on the back and replace the bulb..its pretty simple.

>


Hi,
Thanks for the reply. I havent even got that far. lol.

Once the screw is removed that holds the plastic trim piece, the trim piece doesnt seem to want to come out.. i have tried pulling it , sliding it to both sides and also yanking it with abit of force but no luck. Thats both sides.

Any clues on what i should do? Shall i force it out? dont want to crack it.

Thanks

on the side opposite the screw, there are two little peices that interlock with the bumper opening trim.

>


oh yes i noticed before, i will try tomorrow morning, Do i just pull them?

Thanks again

>
yes, they kinda just pop out.

>



I tried today, not easy ... I think there is 1 screw round the back also holding the plastic surrounding!!

it's usually one screw on the front and the rest just snaps off.

>


Thanks Man, i will try again, it just wont come out, even with slight force.

I shall try again.