Hey I was just wondering about the options for downpipes and how they would line up to the exhaust?

Right now I have a primary cat from an MR2 and I am thinking of just gutting it and using it as my DP for my 5SFTE project. Down the road I would eventually upgrade to a full 3" mandrell bent DP. <--- I don't want this topic to turn into a discussion telling me to just go to the DP for better gains and lighter weights, I have read all those discussions many times on other forums.

I am just wondering if the shape of the DP on the MR2 is different than the shape on the Celica Alltrac DP, or are they the same where they bolt up to the manifold and the exhaust piping? Also, do the KO and the Berk DP's line up to the same spots? The reason I want to know is that if I were to use a gutted cat and have a cat back exhaust system built, would I be able to buy a DP and have it bolt up or would I need to rework my exhaust?

This post has been edited by WALKER: Aug 31, 2006 - 12:09 PM

its all in the same spot. the only time u need the exhaust redone, is when your going from a 5sfe to any 3sgte downpipe. then once you have that done, any of them will work

Alright, sounds great. Glad to hear they are all compatable.

Can't wait to get that 3sgte downpipe on my car!

im pretty sure that the mr2 dp is shorter then the alltrac/gt4 dp but the difference is like a half inch so it doesnt matter too much when companies construct a dp for the 3s and thats the reason why there isnt a mr2 specific dp or a alltrac/gt4 specific dp. and believe you me. i know plenty about being half an inch short!

lol

asians. WTF?

/\
coworker helped me out with that problem lol









twice.

This post has been edited by urbandork: Aug 31, 2006 - 2:24 PM

>



/\
Too much information Craig

lol co worker jason thought it would be funny to dp me. hahaah

once again my coworker editing my post lol

or i'm just another !!!SNEAKY ASIAN!!!

who wants a cellphone cus we are bord lol

nokia PrePaid Pone

This post has been edited by urbandork: Aug 31, 2006 - 8:58 PM

I have a gutted MR2 DP from my friend. It does bolt up to the first peice of the DP attached to the Turbo but the outlet is turned 90 degrees for some reason. It looked exactly the same on the MR2T but would not work for my setup. I'm not sure why so fit the parts together yourself and see if its just the ones I have. There is a flat side with no bolts on both parts and the stock 5s-FE part as well but they are on different sides somehow. Wish I had pics to explain. Hope you understand what I mean.