i heard that a big brake kit doesnt do much better than just upgrading your stocks. like getten a better compound pads and drilled/slotted rotors. is there that big of a different? i know it would be a lot cheaper than getten willowood. not as sexy but cheaper.
questions on big brakes - 6G Celicas Forums
some of us paid less for our clips than that brake setup!!!! thats really expensive and i dont think the 7th gen setup will work on ours. i got some nopi drilled and slotted rotors and my friend who gave them to me said the company accidentally sent the wrong rotors...he was working on a 7th gen and they didnt quite fit. so he gave them i mean sold them to me.
QUOTE (Galcobar @ Oct 15, 2008 - 2:44 AM)You want power but have no money. That's a problem.Cheap. Reliable. Fast. Pick two.
As soon as i get my brake project of the ground, ill fill you guys in...
thats should be soon...
thats should be soon...
94 GT - Sold -------- 69 Pontiac Lemans - Sold88 Alltrac - Sold ---- 04 WRX - Sold00 GT-S - Sold ------ 91 Miata - project/drift car95 GT - Sold -------- 96 GT - New Daily Drive
Yeah i found these on ebay awhile, about the same price also.
http://cgi.ebay.com/D2-Racing-8-Pot-Calipe...1QQcmdZViewItem
Are these for a SSIII? They come with the steel braided brake lines also.
http://cgi.ebay.com/D2-Racing-8-Pot-Calipe...1QQcmdZViewItem
Are these for a SSIII? They come with the steel braided brake lines also.
I'am Reinventing the SLow Lane.....
what are the size of stock gt rotors???
>
universal hat....kinda makes me scared
QUOTE(celica47 @ Nov 8, 2006 - 11:41 PM) [snapback]500856[/snapback]
>
Yeah i found these on ebay awhile, about the same price also.
http://cgi.ebay.com/D2-Racing-8-Pot-Calipe...1QQcmdZViewItem
Are these for a SSIII? They come with the steel braided brake lines also.
Yeah i found these on ebay awhile, about the same price also.
http://cgi.ebay.com/D2-Racing-8-Pot-Calipe...1QQcmdZViewItem
Are these for a SSIII? They come with the steel braided brake lines also.
universal hat....kinda makes me scared
What does?
I'am Reinventing the SLow Lane.....
the universal Hat...
look at the rotor its 2 piece...piece 1) actuall contact surface (disk)
2)hat where it slides over your studs and mounts to your hub...
its not application specific, many holes = not specific design FTL
look at the rotor its 2 piece...piece 1) actuall contact surface (disk)
2)hat where it slides over your studs and mounts to your hub...
its not application specific, many holes = not specific design FTL
>
I'm assuming you're asking for the front? If so, that information is below.
Overall Diameter: 275mm
Minimum Thickness: 26mm
Overall Height: 49.5mm
QUOTE(Punch @ Nov 9, 2006 - 8:50 AM) [snapback]500965[/snapback]
>
what are the size of stock gt rotors???
what are the size of stock gt rotors???
I'm assuming you're asking for the front? If so, that information is below.
Overall Diameter: 275mm
Minimum Thickness: 26mm
Overall Height: 49.5mm
New Toyota project coming soon...
>
True that. If you get upgraded stock pads, rotors, and lines, you'll most likely be happy. The car doesn't wiegh much, so it just doesn't need the bigger brakes. I've got a set of 4 piston calibers I was thinking about test fitting to my Celica to see how much modifications are needed. As of right now, it looks like all I'll have to do is make a different mount. Shouldn't be hard. If I do it over winter break, I'll let you all know. I might sell the plates and calipers if it's not that hard to put together.
QUOTE(ra65_22re @ Nov 1, 2006 - 3:45 PM) [snapback]498351[/snapback]
>
i heard that a big brake kit doesnt do much better than just upgrading your stocks. like getten a better compound pads and drilled/slotted rotors. is there that big of a different? i know it would be a lot cheaper than getten willowood. not as sexy but cheaper.
i heard that a big brake kit doesnt do much better than just upgrading your stocks. like getten a better compound pads and drilled/slotted rotors. is there that big of a different? i know it would be a lot cheaper than getten willowood. not as sexy but cheaper.
True that. If you get upgraded stock pads, rotors, and lines, you'll most likely be happy. The car doesn't wiegh much, so it just doesn't need the bigger brakes. I've got a set of 4 piston calibers I was thinking about test fitting to my Celica to see how much modifications are needed. As of right now, it looks like all I'll have to do is make a different mount. Shouldn't be hard. If I do it over winter break, I'll let you all know. I might sell the plates and calipers if it's not that hard to put together.
Live Free, Be Happy
90% of people who get 'big brakes' do it for aesthetic value. You gotta abuse brakes pretty hard and very frequently to make full use of fixed 4+ piston calipers and 12+ inch rotors. I know I got bigger alltrac front brakes for the looks...
This post has been edited by Kwanza26: Nov 10, 2006 - 12:22 AM
This post has been edited by Kwanza26: Nov 10, 2006 - 12:22 AM
"It's ok to be naked girl... I'm an artist!"1995 AT200 Celica ST:stocked out daily driver...1984 AE86 Corolla GT-SR5:silvertop 20V 4AGE project car jacked up with goodies...1991 SW2x MR2 n/a:bare bones hardtop model soon to be...
I agree with kwanza. I just put on crossed drilled rotors on my GT and I really don't feel a big difference from stock (non drilled) rotors. The only thing that makes me say "wow" is when I see them on the car.
bigger brakes will make the car stop better but do you really need them to ? the stock brakes work well when they have good pad/rotors. IMO it isn't worth it unless you are going for a "bling" upgrade factor. If you really want an upgrade then switch to SS braided lines, that seems to be the weakest point of our braking system, which is minimal.
bigger brakes will make the car stop better but do you really need them to ? the stock brakes work well when they have good pad/rotors. IMO it isn't worth it unless you are going for a "bling" upgrade factor. If you really want an upgrade then switch to SS braided lines, that seems to be the weakest point of our braking system, which is minimal.
my st205 swapandour Beams swap
I think that the weakest point of most everyone's braking system is their tires. Brake upgrades don't help much if your car won't stick to the road.
New Toyota project coming soon...
I'm assuming you're asking for the front? If so, that information is below.
Overall Diameter: 275mm
Minimum Thickness: 26mm
Overall Height: 49.5mm
Thanks ...
Overall Diameter: 275mm
Minimum Thickness: 26mm
Overall Height: 49.5mm
Thanks ...
idk about the rest of you...jdg should be able to back me up on this, though.
as an auto-x'er, i USE BRAKES. i haven't have good results with drilled/slotted rotors...they seem to warp easier from the heat. maybe i need to buy better ones....but they do eat up an expensive set of pads a little too fast for my liking. i've been known to use up brake pads pretty fast...like a whole set of hawks in one track day at waterford hills.
as far as i can tell, the best ways to improve your braking are:
-install stainless lines
-use motul dot 4 rbf600 fluid (my personal recommendation)
-get the best pads you can (green stuff, hawk, etc.)
-get good tires. please do not underestimate the importance of good rubber in stopping ability.
i'm waiting for spring to do all of this to my new celica, but that was the combination that worked miracles for my old one.
as an auto-x'er, i USE BRAKES. i haven't have good results with drilled/slotted rotors...they seem to warp easier from the heat. maybe i need to buy better ones....but they do eat up an expensive set of pads a little too fast for my liking. i've been known to use up brake pads pretty fast...like a whole set of hawks in one track day at waterford hills.
as far as i can tell, the best ways to improve your braking are:
-install stainless lines
-use motul dot 4 rbf600 fluid (my personal recommendation)
-get the best pads you can (green stuff, hawk, etc.)
-get good tires. please do not underestimate the importance of good rubber in stopping ability.
i'm waiting for spring to do all of this to my new celica, but that was the combination that worked miracles for my old one.
do you know who i am, mr. worley?
http://cgi.ebay.com/D2-Racing-8-Pot-Calipe...1QQcmdZViewItem
only $2,010.23
im coming out with a set up soon... Alot less then that...
This post has been edited by Punch: Nov 23, 2006 - 12:50 PM
only $2,010.23
im coming out with a set up soon... Alot less then that...
This post has been edited by Punch: Nov 23, 2006 - 12:50 PM