So here is the deal.....I have a 94 ST and I have the JDM fog lights all wired up but not to a multi function switch just to a cheap switch I got at pepboys....i was in the junkyard the other day and there was a multi function switch in a 6g there so i took it...now i saw the post about how to setup the switch with factory wire in it....as you know the USDM one from 94 do not have this...any ideas of how i would set this up with the multifunction switch....thanks
This post has been edited by Daftboy: Sep 12, 2006 - 9:55 AM
--------------------------------私は銀行に漂う,TRDInspired
--------------------------------私は銀行に漂う,TRDInspired
brianforster did something like what you're trying to do. You might give him a shout.
Project ST204.5 99.88946% complete...
Are you talking about the switch thats also together with the turn signal? If it is I saw a write up for that here somewhere.
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
Yes that swithc....that write up shows how to do if it you have the stock wires there already...which i do not
--------------------------------私は銀行に漂う,TRDInspired
no one...lol...i guess i will go into this blind then....
--------------------------------私は銀行に漂う,TRDInspired
