Like i said...my power windows arent working..in either side. I hit the switch and i get absolutely nothing...the window motor isnt even doing anything. I checked the door fuse and it was fine and the all the wires were cliped together...my power locks still work but i dont know what the heck is going on. Any advice would be great..thanks

Ryan

were you playing around inside of the door? like wires and ect?

theres a 10 amp fuse..number 18 in the diagram.
in the passenger compartment...big one lower right.
heres the pdf:

http://www.celicatech.com/imagearchive/bgb...%20breakers.pdf

ill have to check that fuse right away...i didnt even think about the passenger side...and yes i was messing around with the door...everythings been taking apart sometime or other during my swap..thanks guys..ill let you know whats up!!!

ok so i looked at fuse 18...there was some corrorsion on it so i replace it with another 30 amp fuse out of the engine bay...and i got nothing...i dont know what to do next...i has to be something with the wires or something because my moonroof doesnt work either and they are on the same fuse line...anthing else i should do..also my antenna went out...its stuck up.. Does that have anything to do with it. Thanks guys

Ryan

I know this sounds dumb but check fuse #13 (for the gauges)

I pulled my fuse (gauges) to stop my odometer for a few days (long story) and it killed my power windows and my moonroof when it was out, also stopped my alternator from working and after a day it was draining my battery.

edit: also, check this http://www.6gc.net/forums/index.php?showtopic=36929

This post has been edited by Batman722: Oct 2, 2006 - 11:57 PM

>

I think your right. The 10A guage fuse is the one that powers the windows. The 30A door fuse powers the locks i think...

>

The gauge fuse dosen't power either directly. It is used to power the control relays in the systems. It is a common link in all of the systems that don't work.

well its not fuse 13 either...what the heck!

any other ideas...this really stinks

http://www.celicatech.com/vfewdsou/1995/95...ic/powrwind.pdf

this helped me when i had problems


these are the fuses leading into the power window system
30a door
10a gauge
30a power

This post has been edited by Stu37363: Oct 9, 2006 - 8:20 PM