I need pics of the install or something with Projectors. I installed mine but theyre not working. I dont know what to do
HID Kit Install 56K BEWARE!! - 6G Celicas Forums
heres another write up & comparing against another car, i posted some small gif images i think like 80k ttl for all of them
http://www.6gc.net/forums/index.php?showtopic=45554
>
whats happening? dont light up at all? blinking?
http://www.6gc.net/forums/index.php?showtopic=45554
>
QUOTE
>I need pics of the install or something with Projectors. I installed mine but theyre not working. I dont know what to do
whats happening? dont light up at all? blinking?
you know why they put sheep at the edge of a cliff.... that way they push back!(2:27:32 AM) edit: please f*cking work, f*ck, sh*t, piss(2:28:08 AM) edit: that did the trick
well I got them working(blew a fuse installing them), but now my drivers side wont turn on at all. I checked all my wiring, the fuses, and all of the connections to make sure everything was still in order and everything was good. This is where I get lost. The only thing I havent done is check the bulb to find out if maybe it got broken or is blown already.
so I started my car today just to watch the passenger side one start to blink then it quit on me too. Could someone please help me with this.
>
>
These bulbs are VERY sensitive to any touch or movement.
If you have messed with them in ANY way it could result
in malfunction. Maybe the bulb, or ballast, are bad. Both
can result in your light not working properly. Where did you
get your kit from?
QUOTE(massbrandon @ Feb 22, 2007 - 8:05 AM) [snapback]529309[/snapback]
>
well I got them working(blew a fuse installing them), but now my drivers side wont turn on at all. I checked all my wiring, the fuses, and all of the connections to make sure everything was still in order and everything was good. This is where I get lost. The only thing I havent done is check the bulb to find out if maybe it got broken or is blown already.
well I got them working(blew a fuse installing them), but now my drivers side wont turn on at all. I checked all my wiring, the fuses, and all of the connections to make sure everything was still in order and everything was good. This is where I get lost. The only thing I havent done is check the bulb to find out if maybe it got broken or is blown already.
>
QUOTE(massbrandon @ Feb 23, 2007 - 2:08 PM) [snapback]529692[/snapback]
>
so I started my car today just to watch the passenger side one start to blink then it quit on me too. Could someone please help me with this.
so I started my car today just to watch the passenger side one start to blink then it quit on me too. Could someone please help me with this.
These bulbs are VERY sensitive to any touch or movement.
If you have messed with them in ANY way it could result
in malfunction. Maybe the bulb, or ballast, are bad. Both
can result in your light not working properly. Where did you
get your kit from?
I got the kit from the GB that culpable ran. So in other words I got the same ones that everyone else has.
ballast....
mishandling in shippin can poss cause that so im told, my one did that, not using them right now so i dont know how the other one is holding up, but it was working perfectly when i had it in ... the blinking when you first turn them on at idle - you can just rev it to give it some mroe juice and it should stop the blinking
also blinking is not good for hid bulbs, and if you touched them or got anytype of moisture or oilyness on them it may cause the bulb to overheat and blow.. if the bulbs are clear and no cracks then id think it was the ballast - try reading up on the system on wikki if ya have nothing better to do
if for nothing else gives you an idea of what all is goin on up there in them headlights
mishandling in shippin can poss cause that so im told, my one did that, not using them right now so i dont know how the other one is holding up, but it was working perfectly when i had it in ... the blinking when you first turn them on at idle - you can just rev it to give it some mroe juice and it should stop the blinking
also blinking is not good for hid bulbs, and if you touched them or got anytype of moisture or oilyness on them it may cause the bulb to overheat and blow.. if the bulbs are clear and no cracks then id think it was the ballast - try reading up on the system on wikki if ya have nothing better to do
if for nothing else gives you an idea of what all is goin on up there in them headlights
you know why they put sheep at the edge of a cliff.... that way they push back!(2:27:32 AM) edit: please f*cking work, f*ck, sh*t, piss(2:28:08 AM) edit: that did the trick
massbrandon: I had the same problem also bro. Both my ballast working fine....then after driving it, the passanger side quit working. I blew about 3 "15" fuses. SO now i have to get a new ballast. On a side note, i checked the bulb and it works fine so i know its the ballast that is malfunctioned.
I'am Reinventing the SLow Lane.....
i keep blowing the 15a fuse for the headlights...
ive read on the net to put 20a in....i dont know why they keep blowing
ive read on the net to put 20a in....i dont know why they keep blowing
hey sorry to bump this old post, but it is the only, step by step hid install for the 6th gen I can find and the pictures arnt working for me. Would it be possible to rehost them? thanks very much.
or also a link to a install of a kit on another 6th gen would be awesome as well.
or also a link to a install of a kit on another 6th gen would be awesome as well.
Pictures are not working. Can someone re-upload these?
on these thread you can find a few pics of the kit installed on a celica with JDM proectors
lew's car
>
lol safety is even spelled safty!
I bought some LED 1157 bulbs for my cutlass and had the same thing as your instructions. You can tell they used an online translator or something. btw the pics aren't showing up in the first post anymore
QUOTE(tomazws @ Oct 19, 2006 - 7:29 PM) [snapback]493816[/snapback]
> I thought this is really funny... talk about Engrish...
lol safety is even spelled safty!
I bought some LED 1157 bulbs for my cutlass and had the same thing as your instructions. You can tell they used an online translator or something. btw the pics aren't showing up in the first post anymore
DanAIM: OldsyotaMy Cardomain
pics don't work..
----------------------------------------------------------------------------------------------------------------------------------------------------------------
No working pics
>
Ya thats what happens when the post is 3 YEARS OLD!!!
But seriously make sure you check the post date before asking questions.
QUOTE (DarkLupus @ Aug 13, 2010 - 2:08 PM) 
>No working pics
Ya thats what happens when the post is 3 YEARS OLD!!!
But seriously make sure you check the post date before asking questions.