My right turn signal is not working for some reason today after I put the engine back in. It has been sitting for a while and I did take off the tail lights for bondoing, but when I use the right turn signal the turn lamp comes on green and all I can hear is an "annnnnnnnnnnnnnnnnnnnnnnnnnn" sound. The lights don't flash at all. Any possible solutions before I torch the celi down?

the left works just fine as do the emergency flasher?

LEft works, E works, but no lights on the right, could be light bulbs out on both sides, but thats really weird cause the front comes on when the lights turn on.

turn signal light bulbs are dual filament so it is entirely possible that only the filament for the blinker is out while the filament for the parking light is fine. I had this problem but it wasn't the bulb that was bad, it was the harness itself.

relay possibly?