Over 1M Posts • 84K Topics • 9K Authors

rx-7 injectors - 6G Celicas Forums

Topic #42610 8 posts Started by Stu37363
if anyone goes looking for the rx-7 injectors for the 5sfte setup try www.rx7club.com

i put up a wtb on their site and was swamped with replies the same day... i had been meaning to put this up awhile back but i forgot. i beleive they know them as 89-91 s5 n/a injectors.

460cc RX-7 Injectors Pt. #195500-2010

think i ended up paying $15 a peice shipped for them.

hope this helps someone smile.gif
that's where i got mine from. same price 2

98 Celica GT -- 5S-FTE: 230WHP 237FT-LBS06 Civic EXMy For Sale Thread
SWEET. this is great help for people who are intending to go 5sfte. but be sure to get them cleaned and tested before installing it.

This post has been edited by shin: Oct 28, 2006 - 10:11 AM

Turbo install made possible thanks toTeamJ.D.M.officially 5SFTE junior member~*MuH NeW RiDe*~
>
QUOTE(shin @ Oct 28, 2006 - 11:09 AM) [snapback]497030[/snapback]
>
SWEET. this is great help for people who are intending to go 5sfte. but be sure to get them cleaned and tested before installing it.

X2
thats a great deal on those.
i highly reccomend http://www.injectorservices.com/ for having them cleaned, ect, and are half the price of RC engineering.
they charge 60$ for a set of 4, cleaned, and flow tested, with a printout that shows the before and after readings. IIRC that includes return shipping to you.
RC gets 115+ shipping for the same service.
i had my 315s done by RC back in the day, and we just had a set done for my cousins deuce a couple months ago, and i can honestly say they look just as good as the ones i had done by RC.
as cheap as your getting them, i would really think about having them cleaned, if for no other reason than to have peice of mind.
wink.gif

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
i'm getting mine cleaned & tested @ witchhunter performance. heard lotsa gd things about them

This post has been edited by elvasoshexai: Oct 28, 2006 - 2:24 PM

98 Celica GT -- 5S-FTE: 230WHP 237FT-LBS06 Civic EXMy For Sale Thread
>
QUOTE(elvasoshexai @ Oct 28, 2006 - 3:23 PM) [snapback]497076[/snapback]
>
i'm getting mine cleaned & tested @ witchhunter performance. heard lotsa gd things about them

yup, witchhunter is injectorservices.

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
A question about having injectors cleaned. Is there a "shelf life" on them after they are cleaned, meaning should they be used a certain number of days after they are cleaned or is there a way that you should store injectors if you have had them cleaned and new O rings installed to prolong their life before installing them?

GT4WRC.COM
>
QUOTE
>
How do I store injectors when not in use?

Corrosion is probably the injectors biggest enemy. Gum, varnish, and other normal deposits can be removed by cleaning. Since the internals of injectors are made of various steel alloys, they will corrode or rust. Once the fuel inside dries out, the deposits inside harden and the pintle can stick to the seat making it inoperable. There is enough moisture in the air in most parts of the U.S. to cause corrosion with the pintle and seat will not seal and give you a leaky injector if allowed to happen.

If you plan to store injectors for any length of time, wipe the dirt off them and spray them (inside & out) with a penetrating oil like WD40 and seal them in plastic bags then store them in a dry place.


>
QUOTE(WALKER @ Nov 1, 2006 - 10:32 AM) [snapback]498260[/snapback]
>
A question about having injectors cleaned. Is there a "shelf life" on them after they are cleaned, meaning should they be used a certain number of days after they are cleaned or is there a way that you should store injectors if you have had them cleaned and new O rings installed to prolong their life before installing them?


98 Celica GT -- 5S-FTE: 230WHP 237FT-LBS06 Civic EXMy For Sale Thread