Sorry to bring up this post but i have the mirror for the 6g... i have most of it wired up i have the relay and everything i need.. on my control box though I have extra wire blue/yelliow. I have no idea where this goes. My mirrors move up,down.left and right fine but they will not retract or open....any ideas...please help

This post has been edited by Daftboy: Nov 6, 2006 - 1:48 PM

u mean fold foward an backwards? i think that that is done by you, i mean manually, i dont know of any mirrors that fold and extend with a motor for the 6gc, but some one correct me if im wrong.

This post has been edited by 94celicadude: Nov 6, 2006 - 1:05 AM

>

*corrects 94celicadude

Your wrong~! but sorry i cant help daftboy. and it only fold towards the driver. The same way your 'manual' one does.

there are actually JDM power folding mirrors that retract themsevles. i have them installed just not wired up, sorry can't be of help. no time to wire them up.

do a search and you should find a few topics on this... goodluck -R

the blue wire with yellow line is your power wire for the relay. look beneath the driver side kick panel for an identical wire, it's more likely a 12v wire. that's what i used.
though my mirrors aren't finished yet... i need a new relay.

let us know if get it working

ohh yeah definately let us know! haha azian_advanced and i have had these babies for some time now and still not finished lol... i'd love to get these finished... -R

Ill try that tommorw its too late right now.. thanks

i hope azn finishes them and makes one of his "If you can't install this correctly by reading this how-to, then you're an idiot" how-to's. In other words, he makes the best how to's ever.

thanks...
all i need to finish is a friggin relay! the relay the seller sent me was a dud. 3 of the 4 relays on the circuit board were switching fine, but 1 of them was stuck. so when i pressed the button, they'd close but the motors won't stop and i can hear the motors forcing themselves to close (when they're already closed). the same thing goes for when they open. it took me over 30+ hours to figure out that one relay on the board was dead. i always thought it was the wiring.
i told the seller about it and he sent me another relay, except the one he sent me was for the 96+ (i believe) which has different wiring and less relays on the circuitboard... anyway, that's the end of my rant... all in all, i just need another 94-95 mirror relay.
anybody care to donate?

mine was a 94-95 i used some other relay.. bcuz the one i got with my mirrors wasn't even correct

Well mine is done ....everything works great i used all stock things so it looks great clean..no other toggles or anything. Thanks for all the help guys!!...uploading video now...

http://www.zippyvideos.com/6795366026243186/6gcmirror/

This post has been edited by Daftboy: Nov 6, 2006 - 2:05 PM

reminds me of mine way back...

http://members.cox.net/dmetcalf722/MVI_0565.AVI

nice job !!

>

yea... I gave up. Tons of fuses blown (new cost me about 50$) so honestly If you talk about that mirror folding relay, I have one...

ooh i want! i'll pm you about it later malpaso.

thats some nice stuff.

I hope your belack ass didnt play that song because of the video. HAHA

This post has been edited by sugarfree: Nov 11, 2006 - 1:15 AM