Jdog1385

#1

wasup,

Just wanted to know if anybody is looking to buy 15mm H&R Wheel Spacers. I have a set (4) that have not been installed yet...i recently bought stuff for my car so im looking to make some money back.

200 bucks shipped or best offer

This post has been edited by Jdog1385: Nov 28, 2006 - 9:38 AM

6gsillyca

#2

Do you have the extended studs to go with these?

6gcSTVT

#3

pics plz

---

Darin H.

Jdog1385

#4

>

QUOTE(6gsillyca @ Nov 26, 2006 - 7:42 PM) [snapback]505411[/snapback]

>
Do you have the extended studs to go with these?

yep everything comes with the kit.

here's a link to H&R's website. its more usefull then me taking pics of the box
http://www.hrsprings.com/site/index.html

Jdog1385

#5

i have no use for these b/c im buying new wheels that wont fit if i install the spacers.

malpaso

#6

>

QUOTE(Jdog1385 @ Nov 26, 2006 - 1:38 AM) [snapback]505252[/snapback]

>
wasup,

Just wanted to know if anybody is looking to buy 15mm H&R Wheel Spacers. I have a set (4) that have not been installed yet...i recently bought stuff for my car so im looking to make some money back.

200 bucks shipped or best offer

I belive that "shipped" means just for US... or you will ship it to Europe too?

---

No more replicas... This is evolution... This isSS-four:)________[Featured Celica of 6gc.net @ 2010]_________

Batman722

#7

I'm interested too...maybe we can make a deal...

---

my st205 swapandour Beams swap

Jdog1385

#8

>

QUOTE(malpaso @ Nov 28, 2006 - 9:47 AM) [snapback]505856[/snapback]

>
>

QUOTE(Jdog1385 @ Nov 26, 2006 - 1:38 AM) [snapback]505252[/snapback]

>
wasup,

Just wanted to know if anybody is looking to buy 15mm H&R Wheel Spacers. I have a set (4) that have not been installed yet...i recently bought stuff for my car so im looking to make some money back.

200 bucks shipped or best offer

I belive that "shipped" means just for US... or you will ship it to Europe too?

ill gladly ship to europe...might be a little more money but id have to find out how much shipping would cost.

batman you have pm

Jdog1385

#9

i will also check if these spacers will fit on an ST model...im not sure about the rears.

6gcSTVT

#10

yeah they will fit on an ST

---

Darin H.

longsbeans

#11

they look so plain and simple. we could just get the dimensions from you and machine our own spacers and sell em for 50 a pair... 6gc brand =P

This post has been edited by longsbeans: Nov 30, 2006 - 4:00 PM

phattyduck

#12

A set new is around $110. Is that only for a pair and you are selling all 4?

-Charlie

---

2003 Subaru WRX Wagon1989 Camry Alltrac LE 3S-GTE - SV25/ST205 hybrid1988 Camry Alltrac LE - BEAMS swap started

6th_celi_vert

#13

I have TONS of spare body parts, etc. laying around here.


Anything you might be interested in trading for??

---

Cuz Thats How Us Country Boyz RollGrowing up racing motocross, i learned one thing..."Always wear clean underwear, you never know when the Paramedics are gonna have to cut your pants off of you"

Jdog1385

#14

sale pending right now...waiting on a member to reply. ill let you know


>

QUOTE(phattyduck @ Nov 30, 2006 - 6:29 PM) [snapback]506721[/snapback]

>
A set new is around $110. Is that only for a pair and you are selling all 4?

-Charlie

all 4...bill came out to around 240. they also took about 3 months to get to me, a definite pain in the ass to get em.

>

QUOTE(longsbeans @ Nov 30, 2006 - 3:58 PM) [snapback]506677[/snapback]

>



they look so plain and simple. we could just get the dimensions from you and machine our own spacers and sell em for 50 a pair... 6gc brand =P

i know, they look like nothing. but its the material they use. its lightweight and strong as hell.

This post has been edited by Jdog1385: Nov 30, 2006 - 8:52 PM

6th_celi_vert

#15

>

QUOTE(longsbeans @ Nov 30, 2006 - 3:58 PM) [snapback]506677[/snapback]

>



they look so plain and simple. we could just get the dimensions from you and machine our own spacers and sell em for 50 a pair... 6gc brand =P

Im definately not buying anything "home made" that HOLDs the wheels to my car.

---

Cuz Thats How Us Country Boyz RollGrowing up racing motocross, i learned one thing..."Always wear clean underwear, you never know when the Paramedics are gonna have to cut your pants off of you"

Jdog1385

#16

>

QUOTE(6th_celi_vert @ Dec 1, 2006 - 4:11 PM) [snapback]506981[/snapback]

>
>

QUOTE(longsbeans @ Nov 30, 2006 - 3:58 PM) [snapback]506677[/snapback]

>



they look so plain and simple. we could just get the dimensions from you and machine our own spacers and sell em for 50 a pair... 6gc brand =P

Im definately not buying anything "home made" that HOLDs the wheels to my car.

lol i was gonna say that but i was being nice

longsbeans

#17

>

QUOTE(Jdog1385 @ Dec 2, 2006 - 1:10 AM) [snapback]507082[/snapback]

>
>

QUOTE(6th_celi_vert @ Dec 1, 2006 - 4:11 PM) [snapback]506981[/snapback]

>
>

QUOTE(longsbeans @ Nov 30, 2006 - 3:58 PM) [snapback]506677[/snapback]

>



they look so plain and simple. we could just get the dimensions from you and machine our own spacers and sell em for 50 a pair... 6gc brand =P

Im definately not buying anything "home made" that HOLDs the wheels to my car.

lol i was gonna say that but i was being nice

sigh...are there no fellow engineers and CNC machinists to support me? unless they forge their own alloys, density and hardness tests can identify the metal, then the rest is up to the perfects hands of the CNC machine.
I'm sure some of us out there have access to a CNC machine in school or at work. i wasn't talking hammer and chisel production or even a coventional lathe. peace guys.....peace.

Jdog1385

#18

lol, aight sorry man. somebody could definitely draw this up in solid works and put it through the cnc machine...just need to get hands on some strong lightweight metal.

>

QUOTE(longsbeans @ Dec 2, 2006 - 7:58 AM) [snapback]507122[/snapback]

>
>

QUOTE(Jdog1385 @ Dec 2, 2006 - 1:10 AM) [snapback]507082[/snapback]

>
>

QUOTE(6th_celi_vert @ Dec 1, 2006 - 4:11 PM) [snapback]506981[/snapback]

>
>

QUOTE(longsbeans @ Nov 30, 2006 - 3:58 PM) [snapback]506677[/snapback]

>



they look so plain and simple. we could just get the dimensions from you and machine our own spacers and sell em for 50 a pair... 6gc brand =P

Im definately not buying anything "home made" that HOLDs the wheels to my car.

lol i was gonna say that but i was being nice

sigh...are there no fellow engineers and CNC machinists to support me? unless they forge their own alloys, density and hardness tests can identify the metal, then the rest is up to the perfects hands of the CNC machine.
I'm sure some of us out there have access to a CNC machine in school or at work. i wasn't talking hammer and chisel production or even a coventional lathe. peace guys.....peace.