Ok, so my buddy just got a 94 with a 3rd gen swap. The guy who had it previously removed the w2a and added a front mount, but didnt finish doing all the wiring.
So, what exactly do you need to do electrically with removing the w2a?

>
If all the wiring is still in place, you simply need to put short the connection to the level sensor (put a wire across the terminals), and replace the pump with a bulb or resistor...

If you are missing the wiring (relay, wiring at the pump), it is a bit more involved.

-Charlie

ok, that is what i was looking for, thanks a bunch! Now he just needs the JDM hood and front fascia.

http://gt4dc.co.uk/website/howtos/st205_code54.php