Ok, got my buddys 3rd gen 3sgte running good now. Its only pulling .8 bar, I havnt touched the boost controller, but I was just wondering what the stock boost is supposed to be.
and
Right now the intercooler piping for the front mount is in shambles. Its all silicone bends connected together, and the routing puts it right next to the exhaust.
He is going to buy new piping, and since im installing it, I need an estimate on what pipes he needs, and the best way to route the piping, preferably with pics.
We need you to get this beast running good again!

P.S. I gave up on my other buddys swap, he is just too cheap, this guy has money

stock boost for that motor is around .8 - .9 bar (12-13psi). so it sounds like everything is running fine.

do show pictures of how you do this, as i am going to be doing this exact same thing very shortly. thanks

heres a vid i found on youtube on how the piping is run
I/C piping

THanks! Thats the routing that he needs. Any ideas on how many and what bends he is gunna need?