My piston rings are bad and i'm burning oil. I'm tired of my white car having a black rear end, where i have to wash it ever week to keep it looking desent. Does anyone know roughly how much a shop might charge to fix it?
I need new piston rings :( - 6G Celicas Forums
have u done a compression and leak down test..?
no, my girlfriends brother is a mechanic and he checked it out though.
lol i laugh
any good mech knows to do a compression + leak down test before claiming rings...
cause valve seals will do the same thing
any good mech knows to do a compression + leak down test before claiming rings...
cause valve seals will do the same thing
Say if it was that the rings were bad, your looking at about $500-$700 depending on the mechanic you go to. 
However, you may be able to save some money if you get the parts yourself. 
However, you may be able to save some money if you get the parts yourself.
Normally it's the cylinder bore and not the rings that wear.....
So IF you have ring leakdown, you're probably looking at a cylinder rehone at minimum, probably a rebore, not just replacing the rings.
But yes, valve seals also will cause oil burning, and are MUCH more common to go bad.
So IF you have ring leakdown, you're probably looking at a cylinder rehone at minimum, probably a rebore, not just replacing the rings.
But yes, valve seals also will cause oil burning, and are MUCH more common to go bad.
Take the oppertunity to just do an engine swap. =]
>
Yeah thats what i would like to do but i'd have to save for awhile.
QUOTE(tin_foil @ Feb 14, 2007 - 2:25 PM) [snapback]526856[/snapback]
>
Take the oppertunity to just do an engine swap. =]
Take the oppertunity to just do an engine swap. =]
Yeah thats what i would like to do but i'd have to save for awhile.
i think your girlfriends brother gave you an incorrect diagnosis.
15PSI - 30MPG - Megasquirt Tuned
>
if you replace rings you have to rehone newayz
QUOTE(alltracman78 @ Feb 14, 2007 - 2:10 PM) [snapback]526853[/snapback]
>
Normally it's the cylinder bore and not the rings that wear.....
So IF you have ring leakdown, you're probably looking at a cylinder rehone at minimum, probably a rebore, not just replacing the rings.
But yes, valve seals also will cause oil burning, and are MUCH more common to go bad.
Normally it's the cylinder bore and not the rings that wear.....
So IF you have ring leakdown, you're probably looking at a cylinder rehone at minimum, probably a rebore, not just replacing the rings.
But yes, valve seals also will cause oil burning, and are MUCH more common to go bad.
if you replace rings you have to rehone newayz