frotou

#1

Last year the engine was in break in period @ 8 psi. Nothing was going wrong exept ... for the oil consummation ; 1 quart every 300 miles. I decided to open the engine again to see. It was the fuc**** total seals rings who dosen't do their job. So for 2k7 ;

act xtrem pressure plate and 6 puck (w/o spring) disc



custom aluminium race intake



beside the manifold/turbo



arias 82 mm piston/rings



pauter rods (already in motor last year)



block bore to 82 mm



No more blue this year



Now waiting for some parts to reasemble the engine. More pics later.

Claude

This post has been edited by frotou: Oct 24, 2010 - 2:20 AM

playr158

#2

looks good you're doing amazing things!

(but glad your cleaning up the colour )

x_itchy_b_x

#3

looks awesome!! that plenum on that intake manifold is huge!

---

Visit My Automotive & Tech Blog.

nik

#4

very nice cant wait to see the numbers also i had that same clutch and long story short didnt hold the power

---

yea your 3sgte is cool but ill stick to my 7agte

Valo666

#5

dude..that intake is nuts. Who made it?/how much did it cost? I would love to get a custom made one for a 5s. I officaily think we need a Canadian Celica meet..like work with the guys from Ontario MR2club and maybe go with them to Kingston for their meet.

frotou

#6

I reached 200 whp last year and I restarted new things for the celi.

-aquamist water injection
- hks gt3037 turbo
-hks gt-2 wastegate
-hks timming belt conversion
-custom one sided intercooler with 3 inch piping
-custom 3 inch ss exhaust
-greddy 720 cc injectors
-professional products 75mm throttle body
-custom electric power stearing
-electric water pump with controller (davies craig)
-abs removed
-engine bay color change
-full wire tuck
-earl's fitting and line

More things later .

This post has been edited by frotou: Oct 2, 2009 - 8:40 AM

frotou

#7

I have already started !

No more yellow .... soon !



New custom titanium grey for the engine bay



New rad position (inside the front frame)


Give a lot more clearance !!


The electric fan are now in front to even more space.




This post has been edited by frotou: Oct 2, 2009 - 9:17 AM

Nartanian

#8

Looking really good! Nice color too! Definitely two thumbs up.

This post has been edited by Nartanian: Oct 2, 2009 - 11:57 AM

---

"God created turbo lag to give V8's a chance"

pitcelica

#9

The only problem I would see with your setup is the wastegate placement... It's really not the best... The exhaust air flow must do a complete 180° turn to go to the wastegate route. It will be hard to stay at low boost on this big turbo (relatively compared to a 7AFE engine). You may experience boost creep because of that and the 38mm wastegate.

Otherwise, you did some good work!!!! Congrats!!! The engine bay paint is really nice!

Sam

frotou

#10

pitcelica ; the 38mm wastegate and the turbonetic turbo was my old setup and boost control wasn't an issue ; even at low boost . Some pics of the new stuff .




hks gt3037



earl's fitting and lines



All the electronics are all on this plate for easy troubleshooting and wiring



I redone all the wiring with quick disconnect harness


This post has been edited by frotou: Oct 4, 2009 - 1:29 PM

OOBE

#11

Looking good.

---

Past -7A-FTE: Will never forget youPresent -3rd Gen3S-GTE: Swap in progressQUOTE (SinisterSinner @ Dec 19, 2009 - 10:52 AM)I dont want to even think of turbos, they blow up way too often...

frotou

#12

some progress

electric power steering pump



fuel press regulator and fuel filter



removed abs and redone brake lines



they are waiting for some action ....

frotou

#13

Reassemble the engine with the hks wastegate, gt3037 turbo and shimed oil pump.





Twin tensionner belt configuration using 4age hks belt. We can see the relocation of the alternator also.

Nartanian

#14

Looking real good.

---

"God created turbo lag to give V8's a chance"

nik

#15

like the revamp gotta give it up to my twin 7agte lol

---

yea your 3sgte is cool but ill stick to my 7agte

celicast95

#16

You best put a screamer pipe on it!

---

1995 Toyota Celica St- Sold!1994 Toyota Celica Gt- Sold!2001 Honda F4I- Sold!1992 Lexus sc300 5spd!!

CelicaST_CALI

#17

NICE!

---

BANNED. for life, you moron.

FunkySR

#18

awesome.

Smaay

#19

Amazing build! i love seeing this stuff. i really like the new paint.

---

2001 Celica GT-S Turbo1997 Supra TT 6speed1997 Celica 3MZ/1MZ swap1990 Celica All-Trac

Smaay

#20

Amazing build! i love seeing this stuff. i really like the new paint.

Amazing build! i love seeing this stuff. i really like the new paint.

Amazing build! i love seeing this stuff. i really like the new paint.

---

2001 Celica GT-S Turbo1997 Supra TT 6speed1997 Celica 3MZ/1MZ swap1990 Celica All-Trac

Mstoochn

#21

where does the gigantic aluminum plate sit? did they add a large obscure feature in the ST's i dont know about?

sexy looking engine man.. what comp are you running on the pistons?

frotou

#22

The aluminum plate with all the electronic will be located under the passenger carpet . I run approx. 9.5 C/R with the pistons, bloc, head and headgasket I use .

bmj67

#23

looking really nice. one suggestion you should get some of that rubber weatherstrip edging to put on the cut edges of your wiring plate so that the wires cant rub and get damaged

toyocelic

#24

update

---

TOYOCELIC

OOBE

#25

Werd. What's up with this, frotou?

---

Past -7A-FTE: Will never forget youPresent -3rd Gen3S-GTE: Swap in progressQUOTE (SinisterSinner @ Dec 19, 2009 - 10:52 AM)I dont want to even think of turbos, they blow up way too often...

CelicaST_CALI

#26

update??

---

BANNED. for life, you moron.

normality78

#27

Btw, what gearbox you guys using? I kind of worry C56 gb wont able to hold whn hit 300hp mark

frotou

#28

I use the stock at200 gearbox ( c56?) .... Gearbox will be another ''project'' later , I have to make it run and tuned now ....

Sorry for the update , the car was stored for the winter.

Some new pics and more to come !

rear located alternator and some work on the tuck wire


gsxr individual coil for more clean look





The engine is now installed and run ... just have to take some pics .

Later

Frotou

SwissFerdi

#29

WOW! Oh so gorgeous...beautiful. Put it on a dyno yet?

---

'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE

ZGear

#30

Drools......

I could almost eat spaghetti off that clean motor if I could.