Hi!
Where I should drill a hole under the steerin wheel to have good access to run the wire to the battery from my amp. So far i went thru the door, but i would like to go thru the firewall

Thank You for replies

The "right way" to run a power wire for amps, A "how to" for the cleanest and reliable install

I should of done mine the way K-ESD did If you want to run a wire in the firewall, then you'll have to drill a hole in firewall first (I can't remember off the top of my head where I drilled the hole), top coat the visible bare metal with anti-rust or touch up paint, then add a rubber grommet so there will be a good seal when run the wire through the hole. At least that's how I did mine.

thank you guys! that's helped alot

i thought there was a gromit where you could fit wires in the firewall? right by the glove box some where?

>

true, except the battery is located on the other side, so it's easier to do it from that one side.