My2Celi

#1

im trying to install mine right now but it seems like the passenger side low and high bottom bolt doesnt match up. Is there something wrong?

*update i was able to adjust the passenger low beam just enough to screw it, but the high beam is way off. The top 2 bolts will align but the bottom wont. anyone have this problem?

---

<--- I miss :'' (

malpaso

#2

Not at all. Everything matched perfect in my case. Only problem was with wiring...

---

No more replicas... This is evolution... This isSS-four:)________[Featured Celica of 6gc.net @ 2010]_________

My2Celi

#3

that's wierd... all the head light lined up except for the passenger high beam bottom bolt. I put the front bumper back on and it seem to look right. I guess i can zip tie that bottom bolt down.

---

<--- I miss :'' (

m0dd3d1

#4

>

QUOTE(My2Celi @ Mar 27, 2007 - 1:11 AM) [snapback]540193[/snapback]

>
that's wierd... all the head light lined up except for the passenger high beam bottom bolt. I put the front bumper back on and it seem to look right. I guess i can zip tie that bottom bolt down.

Not that that is probably the smartest thing you can do. I didn't have any icssues with my lights just wiring. I would take another look at it.

Triscuit

---

1998 Toyota Celica GT2007 Subaru Impreza WRX STi2007 Toyota Tacoma 4x41974 Datsun 260Z1997 Subaru Legacy L WagonKind of missin' my Celica GT! Hit me up if you're ever in my area. I'm always down for a meet.

DSRT-FX

#5

take another good look at it and see if you can put some rubber washers for the gaps just to ensure that they wont move when your driving. they should just be straight bolt on. any pics? -R

---

ROM-23L 67 + 76 = 143"I wasn't pursuing Sephiroth, I was being summoned by him." - Cloud Strife

ILuvMyCelica95

#6

the projectors and stocks are the same size you shouldn't have a problem with them lining up. Do you have a picture of what exactly isn't lining up?

Edit: frame damage?

This post has been edited by ILuvMyCelica95: Mar 27, 2007 - 10:18 AM

---

Buy my Celica $2,500 -http://www.6gc.net/forums/index.php?showtopic=76562&st=0

95CelicaST

#7

Do you have the two high beams backwards?

---

1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket

presure2

#8

JDM projectors are a 100% bolt in affair, other than the wiring.
if the bolt holes dont line up, then either your not installing them the right way, or the bracket that holds them is bent.

---

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered

My2Celi

#9

I will try to take a picture later tonite. My regular headlight fit just fine, so i dont think it could be the bracket being bent. I try seeing if the other hi beam fit but it didnt. Maybe i got a defected one?

This post has been edited by My2Celi: Mar 27, 2007 - 5:12 PM

---

<--- I miss :'' (