I am looking at a wrecker to buy a new engine something is majorly wrong with my current engine so it needs to be replaced, so i call him and he says he doesnt know what model it is just that it fits a 95 celica, and it is a JDM model, what are the possibilities of engine it can be?
JDM Engines - 6G Celicas Forums
7afe, 3sge, 3sgte
I will return one day.
3sfe, 5sfe, 5afe, 4afe...
"It's ok to be naked girl... I'm an artist!"1995 AT200 Celica ST:stocked out daily driver...1984 AE86 Corolla GT-SR5:silvertop 20V 4AGE project car jacked up with goodies...1991 SW2x MR2 n/a:bare bones hardtop model soon to be...
4S-FE also...
Car #3: 98 Accord LX- purchased 5/06, totaled 8/06Car #2: 95 Celica GT- purchased 8/03, current daily driverCar #1: 01 Focus ZX3- purchased 5/01, sold 8/03
a lot of importers try to sell a 3sfe as a replacement for the 5sfe
'94 TercelUSDM 5EFE * OEM MR-S Rims * Kumho ECSTA ASX 205/50R15 * NST Short Shifterestabon anti-lift plates * KYB GR2 Shocks & Struts * Eibach Pro Kit * Whiteline Rear Sway BarPaseo Sway Bar * Paseo Front Brakes * Momo Shift Knob * Paseo Front SeatsJDM OEM Toyota Altezza Side Markers * Corsa Tailights * Corsa Grille * Corsa Trunk Garnishhttp://www.socaltercel.com
5A-FE? WTF? Specs etc. I have never heard of this one.
from Wiki
A smaller 1.5 L (1498 cc) 5A-F was produced in 1987 and the fuel injected 5A-FE was produced that year and again from 1995 through 1998. Both used a cylinder bore of 78.7 mm (3.1 in) and a stroke of 77 mm (3.0 in). Both had 4 valves per cylinder with DOHC heads and used the narrow 22.3° valve angle.
Output for the carb version was 85 hp (63 kW) at 6000 rpm and 90 ft·lbf (122 N·m) at 3600 rpm. Output for the 1987 FI version was 104 hp (78 kW) at 6000 rpm and 97 ft·lbf (131 N·m) at 4800 rpm. The later one produced 100 hp (75 kW) at 5600 rpm and 102 ft·lbf (138 N·m) @ 4400 rpm.
A smaller 1.5 L (1498 cc) 5A-F was produced in 1987 and the fuel injected 5A-FE was produced that year and again from 1995 through 1998. Both used a cylinder bore of 78.7 mm (3.1 in) and a stroke of 77 mm (3.0 in). Both had 4 valves per cylinder with DOHC heads and used the narrow 22.3° valve angle.
Output for the carb version was 85 hp (63 kW) at 6000 rpm and 90 ft·lbf (122 N·m) at 3600 rpm. Output for the 1987 FI version was 104 hp (78 kW) at 6000 rpm and 97 ft·lbf (131 N·m) at 4800 rpm. The later one produced 100 hp (75 kW) at 5600 rpm and 102 ft·lbf (138 N·m) @ 4400 rpm.
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket
Is there any way to tell what engine it is by looking at it is there any markings somewhere?
well whats the numbers you see on the engine ?? The 3sgte's are labeled by the side the others should have numbers like 2000 or 2200 something like that on it. 
"To Protect And To Serve The Wealthy" -POLICE