Im looking for some way to hook these up. Is there somekind of a pigtail socket that I could use? If no pigtail then something else I could use. Or even a different type of 194 plug from another car/application.
194 bulb - 6G Celicas Forums
I would try to find a female spade connector that would fit the pins. If that dosen't work solder wires to the pins and put any connector you want on the wires. Then you could pack the area around the solder joints with RTV to make it waterproof if needed.
Wasn't there a post somewhere about 5th gen side marker connectors fitting that plug?
One o'dem crazy Canadian freaks, eh?
What is a female spade connector and where would I find one? I would rather not resort to soldering, as I suck at it, and I only have one set of bulbs.
What is RTV?
Can anyone else chime in about the 5th gen sidemarkers?
What is RTV?
Can anyone else chime in about the 5th gen sidemarkers?
RTV = room temperature vulcanization
These are 5th gen front side markers bulb sockets and pigtails
They are for sale BTW
These are female spade connectors.
You can get them from Radio Shack, Walmart (car audio section), etc..
These are 5th gen front side markers bulb sockets and pigtails
They are for sale BTW
These are female spade connectors.
You can get them from Radio Shack, Walmart (car audio section), etc..
_Gary