so where things good? Did mine get shiped overnight to me

?

update?

shipped mine out early today!!!

so here's the update i've been dreading to write and i've been thinking about from my hospital bed.... ... let's begin with the story and end with my solution and hopefully everyone ends up happy...
I want to say i'm extremely sorry to both shocker and daftboy, its been a lot longer than expected and they have been nothing but great through this entire thing....
I work for Statler Brothers Outdoor Advertising and my job is to put up billboards along the sides of highways, bridges, etc.(part time). we wear full body harnesses attached to the main structure via a bungie like chord, yesterday a bolt snapped on the platform i was standing on (as i am told) and i fell to the platform below me... hitting my leg off the platform below... snapping my femur.... yes it does hurt a lot cause i know someone will ask,

So i was in the hospital for over a day and two surgeries later i am home... to my happiness... my celica is parked in my driveway as it finally was done with its surgery (tranny, axles, mounts) as my dad was nice enough to bring it home when i was in the hospital...

now to the bad news... no the units have not yet been tested.... no they have not been shipped... due to my inability to follow my above stated conditions, this is my solution... SHOCKER and DAFTBOY... both units will be tested and returned to you, completed with LED's free of charge... DAFTBOY... you will owe me no payment for LED's or shipping, SHOCKER... the money enclosed to me will be sent back to you

As for units being sent to me currently... due to my lack of mobility, i SHOULD have no problem finishing units in stated 1-2 day period... HOWEVER due to these experiences.... i must warn buyers that time could take longer... and if you are on an extreme deadline... please talk it over with me before sending... thank you and i hope everyone ends up happy with their LED's

WOW..All i can say is What a businessman..
I am terribly sorry about you accident and hope you recover fully and quickly..


I just now was able to enter my house again due to a terrible gas leak in our condos. Once the toilet started moving around while i was trying to aim..I knew somthing had to be wrong..

Im sorry too hear that... Im glad your ok though ive broken/shattered many a bone in my life so i understand. Are you sure about the no payment. I have no problem paying you at all. Just ship it out at your convince its better for you too rest then to run around like a nut. Once again hope everything heals up fine for you and will get to drive the celi. once again. If you have any questions for me just send a PM my way Ill do the best I can to help.

ouch. sorry to hear that. hope you et well soon. i'll just hold off a lil longer on sending you my cc unit to make things easier for you.

Wow, I wish I'd already sent mine to you. jk, man. Sorry to hear about the accident. Way to be an honest business man as well.

no way!!! thats crazy!!! im totaly scared of hights, i could never do your job!!! i hope you get better soon, and please tell me you did'nt brake your right leg cause thats the only leg you need when its time to ride out in the celie!!! JK!!! i hope i made you smile!!! anyways i already sent the a/c controls yesterday and thay shoud be to you by monday/tusday... if your not up to it i compleaty understand just LMK...

This post has been edited by supradog1: May 18, 2007 - 2:35 AM

>
Unless he has a 5 speed. Ive tried driving my car with one foot..It doesnt work for me.

thanks for all the concerns guys, its really no problem doing them now... actually its better cause i can't really move around too much and it makes the days go by faster...

Alright so here's where we are at... Last week I purchased $50 in incandescent lights and LED's for testing in the background application... and i think i've found the ones i like best... the original count for LED's was also wrong... there are four background lights at $4 each and nine indicator lights at $1 each, plus two extra little LED's i'm adding in to get rid of some of the dull spots... now thats the cost of materials ... so new price is $30 in any color you choose....

ALSO.... the red/blue heater control... if the background lights are blue... it overrides the red (blue is higher frequency) and there is no longer any red.... so if you want your background to be blue... the entire thing must be blue... however if the general background is red... i can add a white bulb in to show the blue as well... however the entire background cannot be red....

with that said... even further custom modifications can be made that could change the above but this includes a lot of my time and more $$$$, and i have never tried them so buyer beware.... they include cutting out the blue for red background or adding in spacers to remove the blue color from that region with a blue background.... these are just some of the ideas i have had... if anyone else can think of another way please let me know...

PICTURES TO BE POSTED OF BLUE W/ RED AND BLUE w/ BLUE AFTER MY NEXT SET OF LED's COME IN, LOOKS LIKE WED.

ALSO... if anyone has PMed me and i quoted you $25, this is still good for you guys... a quote is a quote, so supra... no worry about the extra cash

This post has been edited by pittfirefighter: May 20, 2007 - 2:20 PM

sounds good i hopee ur feeling better, sending my out this week!

thanks for all your help!!! my B/F is now jelous and wants his supra a/c controls done... can you do any thing for him???

>

Yeah shouldn't be a problem, most Toyota stuff is pretty much universal as far as parts go and the methods they used to put together the lights... i tried to help my buddy out with his GM IMpala and i believe it was almost impossible to do in a cost effective manner, however i have not done Supra controls yet, but if you want to ship it to me then i can give a quote to you... if you decide that it won't work out, i'll ship it back to you on me

Still doing this man? If so could ya pm me some info with prices and such? Thanks

hey guys tested units today... batteries were dead in camera, will have pics up tomorrow... shocker... LED's look great but A/C logo was a little dark so i'm going to add one more LED in to brighten it up and then yours should be good, Daftboy... hmmm, so was it you or a previous owner that took the yellow highlighter to the back of the buttons??? both knobs look great but all the buttons are... well light green kinda... haha thats what they look like to me but i'm color blind they are not as bright blue as shockers so i'm kinda disappointed so i was thinking about maybe trying to soak your buttons to get that highlighter out and then retrying... maybe more LED's? either way i'll have pics up tomorrow so take a look and let me know what you think

Wow really....I know I never touched it cause I could never figure how too get out the damn thing...lol.... I guess the previous owner tried or something.....post up the picture and we will see what we can do from there =/

Woot..I really apreciate you taking your time to make it just right.
Im sure business will be flowing your way once you get some pics up.

PICTURE TIME

NOW THESE ARE ALL BEFORE MY MOST RECENT UPDATES TO THE UNITS.... i'll explain changes at the end...
One more thing... the camera doesn't show the blue and red quite as bright as they really are... much more noticeable to the naked eye


SHOCKER...



DAFTBOY





What do you think we should do about the highlighter? you can obviously see they are not as bright as Shocker's...

a few led's were added up top to brighten it up and on the a/c button cause it didn't get a lot of light at all.... pics don't show what was added, both units had LED's added to fix dull spots

new pics to be added soon

This post has been edited by pittfirefighter: May 25, 2007 - 2:55 PM

Looking good.
Just a question..Did putting white leds behind the heater and a/c knob not work like we talked about to keep the red on it not work?

This post has been edited by Shocker: May 25, 2007 - 3:51 PM

looks good how many leds? do you have aimed at the top piece of plast that goes to the 5 top buttons? looks like it could use a lil more... and who would color that stuff with high lighter??? haha uv leds would look cool then i guess cuz it would give that cool glowy effect

yes where you able to get my heater knob to shine through as well ?

>

^^^^^ thats about the heater knob control, read it again i posted that a few days ago about it, the blue is too strong for the white to work alone... i could try further modifications but its nothing i've ever done before... just read it, i tried to explain it the best i could...

daftboy... what do you think we should do about your highlighter buttons? the knobs look great in both your units, wouldn't change a thing about either of those

jason... those pics there was only one in the original bulb hole, as mentioned... since then i have added three more to be pointed at the top buttons and another behind the A/C button, its hidden completely in those pics

EDIT: here's what i'm thinking for those heater controls... i have some good quality plastic that i use for audio stuff (brackets, etc) and i could cut that and hot glue? it in there as spacers to get rid of the blue light in that region and then add a white or red LED to have the red shine through... what you guys think?

This post has been edited by pittfirefighter: May 25, 2007 - 5:18 PM

Wow that's beautiful. I would love to enlist your services once I find a climate control that hasn't been scarred by the cigarette lighter by it's previous owner.
Get better man, and keep up the beautiful work!

>
I would greatly appreciate it. I know thats what steers away alot of people from going away from the leds in the cc. I personaly think it would be the step above every body elses climate control boxes. But if it to much trouble dont worry about it. you already done enough for me.

alright i'll give it a shot, doesn't bother me at all , i don't see anything negative coming out of it... i'll try to take as many pics as i can so you can see exactly what i'm doing....

That's a good start pittfirefighter but if you want it to look perfect you'll need to back light each button individually. The directional nature of LEDs do not make them the best solution for back lighting our climate controls. I've tried it just about any way you can think of and this is the only option I've found to be satisfactory.
BTW, Oznium has pretty good prices on their bulk 3mm LEDs. Should help your profit margin or you could pass the savings along to the customer. $2 an LED is pretty steep installed or not.
http://www.oznium.com/led

It'll take a little more work but as you can see the results are outstanding:


This post has been edited by WannabeGT4: May 26, 2007 - 5:07 PM

It's $1 an LED, not $2 for the 3mm, backlight LED's are $4, thats the price i pay, i'm not trying to make any profit off of this, and as the posts say, i have added more LED's to the backlight of the unit