how do you start removing the rear speakers? help please? lol
how to? - 6G Celicas Forums
-uh, take out the grill with a flat head screwdriver
-there is a bolt or screw in there somewhere that you have to take out
-lower the back seats and take out the screws holding the black panel then pry the big black panel off
-there are 3 bolts on the speaker housing, 2 at the top and 1 at the bottom, remove those
-there is a wire running to a clip at the bottom of the whole housing, remove the clip with the wires, then the whole housing should come out
-the rest is easy, just splice and solder the speaker wires and mount the speaker
-reverse the directions to put everythign back together
-there is a bolt or screw in there somewhere that you have to take out
-lower the back seats and take out the screws holding the black panel then pry the big black panel off
-there are 3 bolts on the speaker housing, 2 at the top and 1 at the bottom, remove those
-there is a wire running to a clip at the bottom of the whole housing, remove the clip with the wires, then the whole housing should come out
-the rest is easy, just splice and solder the speaker wires and mount the speaker
-reverse the directions to put everythign back together
>
better than prying it off.. save you some pain and suffering
w/ the carPC in this area behind the speaker (see my profile pics) i have to access this area a lot.
good luck w/ your install!
QUOTE(Redline08 @ Jun 2, 2007 - 4:51 PM) [snapback]564150[/snapback]
>
-take out the grill with a flat head screwdriver
-there is a screw in there that you have to take out
-lower the back seats
- lift up the carpet on the bottom of the seat
- remove the two bolts on either side
- remove the seat from car
- take the bottom part of the seat out simply by pulling it up and out
- there will be a bracket on the paneling w/ two 10mm bolts, remove them.
- where the seat would have been w/ it up there are two screws and one fastener, take out the screws
- the fastener, you 'unscrew it' a little, and then you'll be able to simply pull it out
- where the bottom of the seat was, there will b a screw also, take that out too
- remove the trim from under the door(where it would be when its closed)
- the panel should now come off pretty easily
-there are 3 bolts on the speaker housing, 2 at the top and 1 at the bottom, remove those
-there is a wire running to a clip at the bottom of the whole housing, remove the clip with the wires, then the whole housing should come out
-the rest is easy, just splice and solder the speaker wires and mount the speaker
-reverse the directions to put everything back together
-take out the grill with a flat head screwdriver
-there is a screw in there that you have to take out
-lower the back seats
- lift up the carpet on the bottom of the seat
- remove the two bolts on either side
- remove the seat from car
- take the bottom part of the seat out simply by pulling it up and out
- there will be a bracket on the paneling w/ two 10mm bolts, remove them.
- where the seat would have been w/ it up there are two screws and one fastener, take out the screws
- the fastener, you 'unscrew it' a little, and then you'll be able to simply pull it out
- where the bottom of the seat was, there will b a screw also, take that out too
- remove the trim from under the door(where it would be when its closed)
- the panel should now come off pretty easily
-there are 3 bolts on the speaker housing, 2 at the top and 1 at the bottom, remove those
-there is a wire running to a clip at the bottom of the whole housing, remove the clip with the wires, then the whole housing should come out
-the rest is easy, just splice and solder the speaker wires and mount the speaker
-reverse the directions to put everything back together
better than prying it off.. save you some pain and suffering
w/ the carPC in this area behind the speaker (see my profile pics) i have to access this area a lot.
good luck w/ your install!
QUOTE"And, as always, your friendship, help, and dedication to the advancement of Texas Celica dominance is GREATLY appreciated. Thanks bro." -DEATH1994 GT:V6 swap, 5speed E53 W/ LSD, All Power, now RED1995 ST:SOLD @273k miles, Auto, all power, CarPC, White1994 ST:Totaled, 5spd, all power, RedRIP 07/09/09 @ 241,8101994 Lexus LS400:This is my new DD
lol, yea way btter than prying it off, i guess i was just lazy when i did mine...
hah o well
good luck
hah o well
good luck