spark plugs for a 5sfte? - 6G Celicas Forums
>
yup.
when you get them, gap them to .030
if you have a napa local to you, they may have them in stock, or can order them for you, normally @ less than 2$ ea for BKR7ES-11
QUOTE(super13jew @ Jun 5, 2007 - 4:13 PM) [snapback]565229[/snapback]
yup.
when you get them, gap them to .030
if you have a napa local to you, they may have them in stock, or can order them for you, normally @ less than 2$ ea for BKR7ES-11
Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
Will thgey work with any non-modified engine ? Why 0.030?
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
you mean .30?
98% completion---aaRon
>
no need for them in a non turbo application.
.30 is the stock alltrac gap.
QUOTE(njccmd2002 @ Jun 6, 2007 - 11:23 AM) [snapback]565541[/snapback]
>
Will thgey work with any non-modified engine ? Why 0.030?
Will thgey work with any non-modified engine ? Why 0.030?
no need for them in a non turbo application.
.30 is the stock alltrac gap.
Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
>
No it should be 0.030" (or 0.762mm).
If it was 0.30" (7.62mm) that would be a very large gap, think of a 1/3 of an inch gap on a spark plug.
QUOTE(lubu @ Jun 6, 2007 - 9:32 AM) [snapback]565545[/snapback]
>
you mean .30?
you mean .30?
No it should be 0.030" (or 0.762mm).
If it was 0.30" (7.62mm) that would be a very large gap, think of a 1/3 of an inch gap on a spark plug.
GT4WRC.COM
lol...different unit measurements here...i was looking at the manual and notice .8mm then i look at this and wtf .03...its all good 
98% completion---aaRon