I dont know which clutch will fit with my car,i would lke to knw if this ACT will fit with my st205 '95
cluth for mr2 turbo is good for my car?









http://cgi.ebay.com/ebaymotors/ACT-F1-6-PU...emZ150117331617

This post has been edited by Cobra: Jun 28, 2007 - 2:09 PM

MR2 T and 185/205 clutches have the same physical dimensions.
So a clutch that fits one will bolt to another.

However, stock clutches might have different clamping forces, and different strength discs between models.

Aftermarket ones, if you are going "upgraded" IMO it shouldn't matter as long as it's a good clutch.

I've heard alot of problems with ACT clutches in 185s, MR2s, and swapped Celicas.
I've never used one, so I can't say myself.

Personally, I prefer Exeddy. They seem to be better quality.

thanks for your answer, the exeedy stage2 on this link is better than the on ACT) http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=8064304244

this clutch will be paired with a HKS flywheel.
Thanks in advance, bye

Up...

Going with ACT clutch its not a good idea,at least from my experience.
I suggest to you to go with a complete clutch kit with flywheel from ORC,OSGIKEN,HKS or EXEDY.

>


I have new flywheel hks (not used) you suggest to buy exedy stage2 ?

Well...this depends from what power is your car right now and at what power you are planning to go

ST205 onwers that i know are using Exedy Single Clutch with Carbon disc,they are 250whp-300whp and they are happy with it using the car for daily driving(including hard driving) .

I prefer Exedy a 100 times than ACT

>


My project is for 400hp, daily driving

you have msn?

(excuse but I do not speak well English )

Yeah sure

magikos7@hotmail.com