Defgeph

#1

I'm looking for the stock position of the st205 IC water pump. I got my hands on a 205 pump bracket (thanks Jeremy).

I know its on the drivers side frame rail. Just wondering if any swapper has bolted this bracket on before.

Should this bolt right up ? Or would I need to drill two holes ?

Thanks,
DEF

---

I will return one day.

Kadett

#2

Just looked at my car, Its underneath the stock location of the filterbox. But I can't see where it precisely bolts on to without removing the box.

This post has been edited by Kadett: Jul 11, 2007 - 12:36 PM

---

JDM Powerplant installed, BPU coming very soon!

BloodyStupidDave...

#3

>

QUOTE(Kadett @ Jul 11, 2007 - 6:35 PM) [snapback]577369[/snapback]

>
Just looked at my car, Its underneath the stock location of the filterbox. But I can't see where it precisely bolts on to without removing the box.

I've got that bit of my st202 exposed at the moment so I can take any pictures you want.

This post has been edited by BloodyStupidDavey: Jul 11, 2007 - 12:48 PM

---

DaveyItems for sale

phattyduck

#4

>

QUOTE(Defgeph @ Jul 11, 2007 - 10:18 AM) [snapback]577364[/snapback]

>
I'm looking for the stock position of the st205 IC water pump. I got my hands on a 205 pump bracket (thanks Jeremy).

I know its on the drivers side frame rail. Just wondering if any swapper has bolted this bracket on before.

Should this bolt right up ? Or would I need to drill two holes ?

Thanks,
DEF

Yup, directly on/under the frame rail. The inlet/outlet face the back of the car. I can't tell you if it bolts up to your car though...

-Charlie

---

2003 Subaru WRX Wagon1989 Camry Alltrac LE 3S-GTE - SV25/ST205 hybrid1988 Camry Alltrac LE - BEAMS swap started

nsxtypeR

#5

3 holes are already pre-drilled.
Located underneath the battery/stock air filter
I know because I just placed a ST205 ic-pump onto my own swapped ST202.



This post has been edited by nsxtypeR: Jul 11, 2007 - 3:09 PM

---

JDM ST205

Supersprynt

#6

I used the bracket, but was unsure exactly how to bolt it in. I believe I made up my own location near the frame rail.

This post has been edited by Supersprynt: Jul 11, 2007 - 3:54 PM

---

MyFlickrMyeBay_Perpetual Aperture_

alltracman78

#7

>

QUOTE(nsxtypeR @ Jul 11, 2007 - 3:06 PM) [snapback]577419[/snapback]

>
3 holes are already pre-drilled.
Located underneath the battery/stock air filter
I know because I just placed a ST205 ic-pump onto my own swapped ST202.

Yeah, it should be bolt in Jeff.
Thanks for your 185 bracket.
Good trade.

Defgeph

#8

Thanks guys. I'll give it a shot this weekend.

---

I will return one day.