er... what can i use to safely temporarily plug up the extra hole on the 3sgte oil pan for the oil drain line from the turbo?
i don't hv time to install everything @ once so i'm kind of slowly installing couple things in 1 by 1.
98 Celica GT -- 5S-FTE: 230WHP 237FT-LBS06 Civic EXMy For Sale Thread
This might help, however, pressure or sum1 else can advise.
http://www.6gc.net/forums/index.php?showtopic=49367
You say you don't understand how we go dumb, but have you ever been where i'm from?-=-] Livin it in tha bay's a lil different [-=-
a bolt with the same thread pitch and size.
Edit: Oh yeah don't forget the washer.
This post has been edited by SlowCelica94: Jul 12, 2007 - 12:56 AM
NASA/SCCA RX-7....currently under the knife92 Civic hatch B16 - Sold10th anniv RX-7 - RIPThe Slow Celica - Sold...and then crushed crushed due to street racing.Quote from Seinfeild: George's Boss reading a magazine: "People magazine's most beautiful people. Oh and a Celica...nothin wrong with that!"
That would be a HUGE bolt.....
Good luck finding one in that size.
That plate won't help either.
I would leave it until you install the turbo.....
You can find one, there are alot of supply places online.
However you will have to figure the diameter and thread pitch first.
I don't recall what it is and don't have any out to measure.
It might even be metric pipe thread and not regular thread.....
If you do go this route be careful removing it and use teflon tape on the bolt.
This post has been edited by alltracman78: Jul 12, 2007 - 9:49 PM
You can easily find a bolt that big.....
Check your local hardware stores.
NASA/SCCA RX-7....currently under the knife92 Civic hatch B16 - Sold10th anniv RX-7 - RIPThe Slow Celica - Sold...and then crushed crushed due to street racing.Quote from Seinfeild: George's Boss reading a magazine: "People magazine's most beautiful people. Oh and a Celica...nothin wrong with that!"
