Digged up an old thread for more show and tell

(I found MORE images in my HDD!!!!)
Car ready to be sprayed!

A layer of blue... very dull looking after dried

Better looking after a couple layers and a clear coat

I wanted to make the headlights light up, so I drilled 2 holes on each headlight socket for the LEDs

LEDs inside the headlight socket or whatever u call that piece

Car didn't come with an engine, so there's lots of empty space for me to work with wiring up the LEDs

Rear lamp LEDs

The rear lamps are a bit tricky, I just basically glued everything down...

I cut some plastic off the frames to support the LEDs

As for the interior, I didn't do anything special. I just followed all the color codes in the manual

My camera "skills" from back in the days...

You can totally see the brush strokes....

Picture of the bottom of the car..

After polished and waxed, and then put everything together!
This post has been edited by tomazws: Sep 8, 2009 - 12:24 PM