Over 1M Posts • 84K Topics • 9K Authors

Mixing shock/strut brands? - 6G Celicas Forums

Topic #51000 5 posts Started by dutchboy
What do people think about using different brands of shocks/struts on the front/rear of the car(i.e. Bilstein's in front, KYB GR-2 in back)?

I think I want to go with springs that will lower more in front than in back...


Obviously, this question is fueled by cost. Bilstein fronts can be had for not much more than kyb's, but the rears are quite a bit more expensive(more than I want to pay)

It's a trade off of ego and the wallet smile.gif
i got bilsteins in the rear and kyb in the front, only because i blew one bilstein front and joe gave me a deal on some kybs
>
QUOTE(LewFX @ Aug 7, 2007 - 5:04 PM) [snapback]586131[/snapback]
>
i got bilsteins in the rear and kyb in the front, only because i blew one bilstein front and joe gave me a deal on some kybs


Do you feel this throws off the handling or ride consistency in any way?

i got a soft front and a stiff rear!
>
QUOTE
>i got a soft front and a stiff rear!


I have it the other way around, but thats on the Yelli Celi's AGX's. set to 4 in the front and 2 in the rear.

1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket