Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #51201

cutting crashbar - 6G Celicas Forums

Topic #51201 10 posts Started by lubu
lubu
#1
Does anyone have a picture of their crash bar cut down by a sawzall. Im fittting a c-one bumper and apparently it doesnt fit coz the crashbar is in the way..just how much you need to cut down the bar?

edit: I thinking of fitting the proper crashbar for safety sake so i went to toyotaworld.com and typed in the frame bracklet no#, but they didnt work.

>
QUOTE
>Frame Bracket RH 57201-20060 this is the bracket that the re-bar bolts to, it replaces your stock one
Frame Bracket LH 57202-20070 this is the bracket that the re-bar bolts to, it replaces your stock one



This post has been edited by lubu: Aug 16, 2007 - 4:27 AM
98% completion---aaRon
azian_advanced
#2
you'll have to call in and ask for those frame bracket pieces... it won't work on their website.

also, if you decide to cut the crashbar, it won't sit flush with the bumper absorber and will have about a 1" gap.

but if you decide to cut it anyway, here are the pics:




>
QUOTE
>
i first thought that this was simply ALL BOLT ON but really wasn't. i mean, it was but it wouldn't fit and line up correctly... so a couple of things (for you future gt-four convertors) that needed modifications were:

1. cutting the st205 reinforcement bumper
2. the gap to fill between the bumper and hood

the reinforcement bumper was not a direct bolt-on job... the front frame rails where the re-bar bolts on to is different on the gt4's.

this is how it appears when you have it against the frame rails...

IPB ImageIPB Image
as you can see, the bottom is far too forward for the upper threading to fit through...

this is how it looks after being cut (using an impact metal sheet cutter):
IPB ImageIPB Image
IPB ImageIPB Image

and here it is when bolted on
IPB ImageIPB Image



another thing which i totally missed is when you have the bumper installed, the bar sits slightly higher than it should be. right now, it doesn't fit in the groove on the bumper absorber. that may be because my car was in a previous front end accident and things aren't lining up 100% perfect.



finished gt4 conversion

----------------------------------------------------------------------------------------------------------------------------------------------------------------
lubu
#3
interesting..my crashbar is way DIFFERENT..
i'll get a pic...in abt 15 mins

IPB Image
IPB Image
IPB Image
IPB Image



This post has been edited by lubu: Aug 16, 2007 - 10:13 AM
98% completion---aaRon
Rayme
#4
You crash bar is divided in 3 "cells". Take a grinder with a cutting disc and get rid of the third "cell"(the one on the bottom). It will give you enough place to put the bumper over it and still 2/3 of the crash bar.

This post has been edited by Rayme: Aug 16, 2007 - 10:19 AM
-Rémy02SiR, 08250R
lubu
#5
thanks..thats what i thought too..but when i test fit the c-one bumper i took a quick look and it looks like i need to cut up to half. I'll start with 1/3 first...

btw anyone knows where i can get a rhd gt4 latch please help..

edit..would the foam absober fit in the c-one bumper?

>
QUOTE
>Absorber, front bumper energy 52611-20150 $62.76 This is the foam that goes behind the bumper


This post has been edited by lubu: Aug 16, 2007 - 11:43 AM
98% completion---aaRon
azian_advanced
#6
the crash bar i used is from a gt-four, the one you have is for the st202/st204s... sorry, i forgot to note that.

and i'm pretty sure the gt-four bumper absorber will fit the gt-four c-one bumper.
----------------------------------------------------------------------------------------------------------------------------------------------------------------
CaliJeff
#7
I just cut my c-one bumper. Still looks normal also. I forgot to post pictures a while bacl about it. It just needed a little trim
You say you don't understand how we go dumb, but have you ever been where i'm from?-=-] Livin it in tha bay's a lil different [-=-
lubu
#8
>
QUOTE(azian_advanced @ Aug 17, 2007 - 8:18 AM) [snapback]588538[/snapback]
>
the crash bar i used is from a gt-four, the one you have is for the st202/st204s... sorry, i forgot to note that.

and i'm pretty sure the gt-four bumper absorber will fit the gt-four c-one bumper.


why do you need to cut it, isnt the gt4 crashbar is a perfect fit to the gt4 bumper?
98% completion---aaRon
azian_advanced
#9
it needs to be cut if you're going to fit it on the st202/st204 frame brackets...
----------------------------------------------------------------------------------------------------------------------------------------------------------------
lubu
#10
>
QUOTE(azian_advanced @ Aug 17, 2007 - 11:54 AM) [snapback]588587[/snapback]
>
it needs to be cut if you're going to fit it on the st202/st204 frame brackets...


ohhhh...clear as daylight now. thanks tongue.gif
98% completion---aaRon
← Back to Topics