Does anyone know the part # to the wiring that i will need for the JDM spec low beam projector headlamps. The projectors use a H1 bulb instead of what came stock on our U.S. models, so the wiring is different. Or if anyone can tell me what i need to do to convert this over correctly, i would greatly appreciate all the info. i can get.
Thanks,
jason

go out to pep boys and buy a universal 3 prong socket. cut the old socket off and cut and splice the new one. simple as that. now the hard part with projectors is to rewire the sidemarker light and put it into the small bulb in the projector housing. good luck to ya!

i sold mine a while ago thinking i was getting a new car. decided on a bike and now im in the market for them again.

-alex

--boibleu22+Aug 6, 2003 - 1:43 PM

QUOTE (boibleu22 @ Aug 6, 2003 - 1:43 PM)

go out to pep boys and buy a universal 3 prong socket. cut the old socket off and cut and splice the new one. simple as that. now the hard part with projectors is to rewire the sidemarker light and put it into the small bulb in the projector housing. good luck to ya! -alex

exactly. i got my 3prong from Honda tho...just pull the 3rd one out that you don't need. >>

as for the high beams, they use the same 9005 bulbs that the stockers use. >>

-John-