hi! guys!....i buy a 3sgte 2gen engine, then i wanth to do the swap into my St202(with a 3SFE) but i dont know how many more parts i must purchase before do the swap
the parts that i got its:
-complete engine
-AWD transmission
-intake & exhaust manifolds
-turbo
-intercooler
-alternator
-air conditioning compressor
-direction pump
-ECU
-All sensors

wath more parts i need to complete the swap???

help plz

THX

Fran!

are you have cut harness

no, i have uncut harness

>
unless you plan on putting on a gt4 hood i think you are going to need to get a fmic. the tmic wont fit under the hood unless you do some custom hood work iirc. you will also need to purchase some gauges and a Lotek Gauge pod so you can monitor oil pressure and boost and such. you may also wish to invest in a turbo timer. GL on the swap

i will put an FMIC, yes i need to purchase the turbo timer and the gauges and a blowoff too.... i need some different motor mount? or the 3SGTE will fit without problems? my car its a GT. wath parts need to be replaced?

TMIC fits under the hood. but i highly discourage it. i had the TMIC on there and was knocking when pulling hard because she heated up too much.

did you get the AFM?


GT should fit without needing different mounts

This post has been edited by jcbass7: Sep 9, 2007 - 6:41 PM

AFM? wath means that?

Then not need new motor mount, the engine fit perfectly into my ST202 without problems?
Wath more parts i need purchase? i must rebuilt my 3SGTE, need to buy new oil pump, wather pump, new gasket kit.

3SGTE SWAP HAVE TOO MUCH PROBLEMS???.... BECAUSE I CAN JUST POWER UP MY OLD 3SFE.

the main problem its the ECU istallation and the wiring? or its just easy to do all the swap?