Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #51774

Gt4 front end conversion - 6G Celicas Forums

Topic #51774 62 posts Started by NaderG
_mikeE
#31
Yeah that's what i thought too when i called Astig Racing about the pricing. But thanks for the info 97lestyousay. I'll call Astig Racing and ask for the remainder parts that i'll be needing for the conversion, and see what the price will come to. He also said he'll be throwing in the set of foglights too for me. biggrin.gif Also, to extend the hood latch catch, that won't be hard right. Sorry I recently just got my car not too long ago and due to school, i haven't had the time to really analyze the car so yeah.
jjbenzo
#32
Has anyone been able to buy a new LHD GT-Four hood latch? I have been trying to get one from toyotaworld for a few months now with no luck...is there any other place to order these from?
1998 Toyota Celica GT Liftback-Black on black/ivory-Bought new, sold in 2010, rebought in 20211999 Toyota Celica GT Liftback-Renaissance red on black
bccentaur3
#33
If you cant get it from toyotaworld you're SOL. J/K, I don't know. If you know how to weld or know someone who can just cut the latch and add 1/2 inch of metal to extend the latch.
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
Gt4soldier24
#34
Ok.. my only question about this Gt4 front end conversion is.. could you replace the st202 front bumper with an oem st205 front bumper, as well as the hoods? and if so.. are these st205 parts in america? because ive been doing alot of searchs, but the parts im looking for are only in UK. the engine swap seems to be easier than doing the body work for some reason.. as ebay supplies you with many full engine swaps of the twin entry turbo st205. basically.. all i need is the oem front bumper.. fog light housing.. and hood. and my project will be complete.
enVision. "One mod; The Driver."Marlon - 325icMike - Celica GT4*Justin - M3icCed - M318ti[color="#0000FF"][/color]
bccentaur3
#35
Check the stickies in the exterior section bud. This pops up all the time and no one seems to search hard enough. oops, sorry just realized you've just joinded today. Well look in the stickies and you'll have all the part numbers. Go to any toyota and give them the part number. Make sure you tell them its jdm.
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
808celica
#36
all i have to say is prioritize your spending first.......dont jump too far on body stuff for your car......make sure the engine can outlast everything else.

just take it easy and do things little by little. dont rush.......
I don't normally drive fast, but when I do its on a curvy section of this island
Penkka
#37
If i buy a Gt-four carbon hood, will it fit on my GT/SS-II?

How much and how does it need to be modified?
320hp @ 6300rpm and 420Nm @ 3250rpm. yay!My ST205 WRC buildthread
azian_advanced
#38
the gt-four carbon hold will bolt straight on. but you'll have a gap at the front where it meets the front bumper if you don't get a gt-four bumper as well.
also, if you get the carbon hood, it won't include the hood grill and vents.
----------------------------------------------------------------------------------------------------------------------------------------------------------------
hongkongnerdboy
#39
>
QUOTE(808celica @ Jan 9, 2008 - 4:57 PM) [snapback]629597[/snapback]
>
all i have to say is prioritize your spending first.......dont jump too far on body stuff for your car......make sure the engine can outlast everything else.

just take it easy and do things little by little. dont rush.......



i thought toyota engines can go through hell and back biggrin.gif
QUOTE(thespacepanda @ Feb 21, 2008 - 4:37 PM) [snapback]644164[/snapback]When I worked for Pizza Hut our store won a health code violation.
bccentaur3
#40
heck yeah ^. smile.gif I'm at 208K miles and still running strong. I hope it last through this winter so I can do the swap by spring.
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
808celica
#41
^^well what i really meant is make sure you have some GO for the SHOW.
I don't normally drive fast, but when I do its on a curvy section of this island
Penkka
#42
>
QUOTE(azian_advanced @ Jan 15, 2008 - 7:58 PM) [snapback]631111[/snapback]
>
the gt-four carbon hold will bolt straight on. but you'll have a gap at the front where it meets the front bumper if you don't get a gt-four bumper as well.
also, if you get the carbon hood, it won't include the hood grill and vents.


my mate is going to do it using his own gt4's hood to take a mould in glassfibre and then do a carbon fibre one. This means it will include all the wents in carbon fibre. So how should I mod it, to get the perfect fit?
320hp @ 6300rpm and 420Nm @ 3250rpm. yay!My ST205 WRC buildthread
joehernandez
#43
im doing a conversion,,, well not a conversion, only the body kit of a gt four
and i have already spent more than 2000 dollars,, heres the list

gtfour hood
gt four bumper
clear headlights
404 sideskirts
jdm tails
trd rear splitters
tein s
404 front lip
and right now im contacting someone who has already got me all the grilles and the plastics and seal that the front end needs,, all this is going to be almost 300,,
so pretty much the total is 2300, and still i havent paint them

but for me there is a good side,,
theres people i know that are waiting for me to change the body kit, so they can get my parts, like the oem hood, bumper, tails, headlights and all that stuff, and its going to be almos half the price i have already spent on my gt four parts,,
so it kind of balances out.
luisitol
#44
So BottomLine if you use the GT4 front bumper you HAVE to use the hood? I would love to throw the GT4 bumper on my 96 Vert, but think the hood would be a little much.
ScoobyDooCruiser
#45
Yes. It doesn't fit.


This post has been edited by ScoobyDooCruiser: Feb 1, 2008 - 12:45 PM
psalm 69
_mikeE
#46
So I have a question, i'm going to be doing the GT-4 front conversion as well, so far. I purchsed the hood, but i've just one concern, on a rainy day will my engine be ok enduring the rain, i'm actually more concerned about when i'm parked and its raining throughout the night.
What do you guys do? Do you guys drive it out at all when it rains? i've just a driveway and no garage so the car will be outside at all times rain or shine.
As for the rain guard and insulator--should i get them? Will they really stop the rain? I'm still awaiting Randy (97lestyousay) to get back to me and a couple others about if he can still make the GT4 hood vent rain deflector but i read that it won't stop the rain but only slow it down.
I'm concerned of the rust that will be caused in my engine bay.
97lestyousay
#47
Everything in the bay should be painted with the exception of
exhaust manifold and misc odds and ends. before cars had under
plastic they were completly exposed under the bay with far worse
corosion protection than we have today. The stock gt4 rainguard has loovers
moisture still gets in just not as much as being completely open. The ones I sold are
more or less a shield keep water from just spraying directly on the wireing.
Water still gets in, but I can hose it off without directly hosing my engine.
The 3sgte won't have a problem being completly exposed or hasn't that
I have heard of anyway.
JDM guy made me do it.
luisitol
#48
>
QUOTE(ScoobyDooCruiser @ Feb 1, 2008 - 12:45 PM) [snapback]636853[/snapback]
>
Yes. It doesn't fit.


Does it not fit or just leave a gap? from what I've read there will be a gap between teh stock hod and the GT4 bumper. I figure modification would have to be made to a hood, but technically the bumper would fit on the vehicle regardless correct?
bccentaur3
#49
The gt-four bumper WILL fit regardless, BUT without the gt-four hood you will have a gap.
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
_mikeE
#50
>
QUOTE(97lestyousay @ Feb 13, 2008 - 8:49 PM) [snapback]641280[/snapback]
>
Everything in the bay should be painted with the exception of
exhaust manifold and misc odds and ends. before cars had under
plastic they were completly exposed under the bay with far worse
corosion protection than we have today. The stock gt4 rainguard has loovers
moisture still gets in just not as much as being completely open. The ones I sold are
more or less a shield keep water from just spraying directly on the wireing.
Water still gets in, but I can hose it off without directly hosing my engine.
The 3sgte won't have a problem being completly exposed or hasn't that
I have heard of anyway.


So from what you're saying, everything in my engine bay is painted already and I should probably just spray my exhaust manifold and w/e else with some waterproof rust-prevention solution, and it should be fine leaving it out overnight when it rains as well, that's one of my biggest concerns having that I don't have an actual garage to store my car in. And no, I've only a 94 5S-FE motor, not the 3s motor--i wish biggrin.gif maybe next year.
luisitol
#51
>
QUOTE(bccentaur3 @ Feb 13, 2008 - 11:40 PM) [snapback]641346[/snapback]
>
The gt-four bumper WILL fit regardless, BUT without the gt-four hood you will have a gap.


anyone document/photograp this gap when doing a gtfour conversion. it'd be intersting to see what size of gap i'd be dealing with.

97lestyousay
#52
About 1 inch. You will have small mammals nesting in your radiator. kindasad.gif






Hood only, with the bumper only I think you would still have to extend your
stock hood latch or push the cover down every time you open the hood.

IPB Image

This post has been edited by 97lestyousay: Feb 16, 2008 - 1:47 AM
JDM guy made me do it.
luisitol
#53
>
QUOTE(97lestyousay @ Feb 16, 2008 - 1:35 AM) [snapback]642094[/snapback]
>
About 1 inch. You will have small mammals nesting in your radiator. kindasad.gif






Hood only, with the bumper only I think you would still have to extend your
stock hood latch or push the cover down every time you open the hood.

IPB Image


yeah it definitely can't stay that way. thanks for the pic, i wonder if anyone has pics of the gtfour bumper with a stock hood. from the looks of your picture though it looks like a gtfour bumper would sit higher up than the stock hood level so something would have to be fabricated to extend the hood after it was raised.

if anyone happens to have a pic of a gtfour bumper with a stock hood it'd be a great help! smile.gif
_mikeE
#54
K guys, just a quick question, I've beent old that i could extend my hood latch or get a LHD gt4 hood latch if i'm going to decide to use my gt4 hood, however, will it matter if the hood latch is from an LHD or RHD st205? they'll both fit and work right?
jason
#55
daftboy had just the bumper with his stock hood for a bit, he just tightened the bolts on the top to not have a gap. looked like hell to use cuz you know what to look for, but to anyone else didnt look too bad. i would not recommend this as it may bend/warp your bumper

just get the hood as well, and the rain guard from randy and call it a day. looks much better =)
you know why they put sheep at the edge of a cliff.... that way they push back!(2:27:32 AM) edit: please f*cking work, f*ck, sh*t, piss(2:28:08 AM) edit: that did the trick
celicaST
#56
cable goes the opposite way with the rhd latch
I think Bigfoot is blurry, that's the problem. It's not the photographer's fault. Bigfoot is blurry. And that's extra scary to me, because there's a large, out-of-focus monster roaming the countryside.
_mikeE
#57
Ah i c, I guess i'll just have to end up going to toyota to get the hood latch then because i dont want to extend my hood latch because i'm a daily driver and may have to drive the car in winter so i dont plan on using the gt4 hood and bumper during the snow season so i'll have to switch back again, but thanks for the help celicaST.
celicaST
#58
why worry about the snow? i live in colorado and we get a decent amount of snow, no big deal. although my engine bay doesnt stay as clean as it used to frown.gif
I think Bigfoot is blurry, that's the problem. It's not the photographer's fault. Bigfoot is blurry. And that's extra scary to me, because there's a large, out-of-focus monster roaming the countryside.
azian_advanced
#59
no problems with snow here either.. imo the snow makes the gt4 conversion look better wink.gif
----------------------------------------------------------------------------------------------------------------------------------------------------------------
_mikeE
#60
I dunno, thought it might rust up pretty bad or somehow cause water damage if the snow got into the engine bay? no?
← Back to Topics

Page 2 of 3 (62 total posts)