bojangles_8686

#1

I got pulled over last night because one of my bulbs is blown in my taillight.... well today i was trying to take my taillight off and one of the nuts wont come off, when i try to screw it off of the bolt the bolt turns too, what should i do?

Supersprynt

#2

Get some PB Blaster, spray it on, then try it.
You can get it at most auto stores.

This post has been edited by Supersprynt: Aug 7, 2003 - 10:17 PM

---

MyFlickrMyeBay_Perpetual Aperture_

95STCelica

#3

when iw as getting my oil changed they used this special gun they have at meineke to take off screws like that

bojangles_8686

#4

OK cool thanks guys Ill post something when I get it fixed.

95STCelica

#5

no problem, if i didnt get the bulbs out for above the liscence plate i wouldnt pass inspection and they were a bitch to get to, thank god for meineke

macavely

#6

hey you are in luck cause i had the same problem... when you unsrew the other blots just pull the whole unit out... you the thread broke off of you casing...

---

[TeamNJCT

bojangles_8686

#7

Ahhyes, I love vice grips.... thats what did the trick! >> I just clamped down on the bolt and turned the nut and thebolt didnt move, so now i can drive at night without fear of getting pulled over again >>

Inferno

#8

Good thing you got it off! Yeah, I agree with Mac. It sounded like you stripped it.