How much is the OEM GTFour Bar?
Fabricating Front Strut Bar - 6G Celicas Forums
bump? wanted one..
Pandelica 2.0 in progress.
>
dude, you have GOT to be kidding, right?
the OEM gt-4 bar is like 60$
how much cheaper do you want it?
QUOTE(bccentaur3 @ Nov 20, 2007 - 6:06 PM) [snapback]616052[/snapback]
>
>
X2 for the rear strut bar, and only if its cheaper than the oem gtfour one.
>
QUOTE(Shocker @ Nov 20, 2007 - 3:25 PM) [snapback]616005[/snapback]
>
Would you make a 3 point not powder coated for cheaper cost if so i would be intrested?
Also you should look into making a rear strut bar.
Would you make a 3 point not powder coated for cheaper cost if so i would be intrested?
Also you should look into making a rear strut bar.
X2 for the rear strut bar, and only if its cheaper than the oem gtfour one.
dude, you have GOT to be kidding, right?
the OEM gt-4 bar is like 60$
how much cheaper do you want it?
Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
I would still like a 3 point front one ... =/
--------------------------------私は銀行に漂う,TRDInspired
>
but this is for the rear right. anybody know the part number of the front?
QUOTE(presure2 @ Feb 9, 2008 - 7:00 AM) [snapback]639681[/snapback]
>
>
dude, you have GOT to be kidding, right?
the OEM gt-4 bar is like 60$
how much cheaper do you want it?
>
QUOTE(bccentaur3 @ Nov 20, 2007 - 6:06 PM) [snapback]616052[/snapback]
>
>
X2 for the rear strut bar, and only if its cheaper than the oem gtfour one.
>
QUOTE(Shocker @ Nov 20, 2007 - 3:25 PM) [snapback]616005[/snapback]
>
Would you make a 3 point not powder coated for cheaper cost if so i would be intrested?
Also you should look into making a rear strut bar.
Would you make a 3 point not powder coated for cheaper cost if so i would be intrested?
Also you should look into making a rear strut bar.
X2 for the rear strut bar, and only if its cheaper than the oem gtfour one.
dude, you have GOT to be kidding, right?
the OEM gt-4 bar is like 60$
how much cheaper do you want it?
but this is for the rear right. anybody know the part number of the front?
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
How much would you sell just the strut tower rings for? I may need a bunch of them if what's in my head works out.
Panda - You thinking what I'm thinking?
Panda - You thinking what I'm thinking?
ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI]PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYOSUSP: Tein/Bilstein/SusTech/INT: SS-III SEATS/Toyota Hyper SportsEXT: WRC/TRD/404QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)Its a safety feature so that people like you don't end up killing themselves or everyone around them.Slow down Paul Walker.6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url]
Call me fussy if you like, but shouldnt the mounting point of the cross member on the strut brace be in line with the centre of the shock??? or it will subject the top of the shock to a twisting motion when under stress/load????
Would be interested if you did a three point rear strut brace.
Would be interested if you did a three point rear strut brace.
>
Roger that.
QUOTE(DEATH @ Feb 11, 2008 - 5:31 PM) [snapback]640328[/snapback]
>
How much would you sell just the strut tower rings for? I may need a bunch of them if what's in my head works out.
Panda - You thinking what I'm thinking?
How much would you sell just the strut tower rings for? I may need a bunch of them if what's in my head works out.
Panda - You thinking what I'm thinking?
Roger that.
"He won't come out of the bathroom. He keeps telling us we're dark somethings and not his friends.""Hmm. Ask him if he's the dragon reborn.""What?""Just do it."".......He said yes.""Tell him you are not darklings. He should open up."".......Sweet. Thanks.""No problem."
Alright guys, sorry i haven't been around, but I have been busy pumping out metal artwork and other non-celica related stuff. Just not enough time in the day to do everything. Just to let you all know, I am 75% done with my 3pt jig. I can currently turn out single bars, but I think most of you are interested in the 3pt. Ive got some extra time this weekend, so I will finish the jig, and get to pumping the 3pt'rs out.
cool i'm interested in 3-pt front. no hurry.
anyway to make 3-pt similar to cusco front? with the top bar being flat? maybe better fitment with tmic
http://www.6gc.net/parts/29
anyway to make 3-pt similar to cusco front? with the top bar being flat? maybe better fitment with tmic
http://www.6gc.net/parts/29
>
Initially, I am going to do a run of 10 using my current design. Once I get those done a powder coated, I will be able to experiment a little more, and if I can get a hold of someone in my area with a 3s swap, I can work on a setup for the swapped celicas.
This post has been edited by Qucifer: Feb 14, 2008 - 7:00 AM
QUOTE(purplegt4 @ Feb 14, 2008 - 7:08 AM) [snapback]641382[/snapback]
>
cool i'm interested in 3-pt front. no hurry.
anyway to make 3-pt similar to cusco front? with the top bar being flat? maybe better fitment with tmic
http://www.6gc.net/parts/29
cool i'm interested in 3-pt front. no hurry.
anyway to make 3-pt similar to cusco front? with the top bar being flat? maybe better fitment with tmic
http://www.6gc.net/parts/29
Initially, I am going to do a run of 10 using my current design. Once I get those done a powder coated, I will be able to experiment a little more, and if I can get a hold of someone in my area with a 3s swap, I can work on a setup for the swapped celicas.
This post has been edited by Qucifer: Feb 14, 2008 - 7:00 AM
>
Can you sell us 10+ of these or no?
QUOTE(thespacepanda @ Feb 12, 2008 - 5:06 PM) [snapback]640815[/snapback]
>
>
Roger that.
>
QUOTE(DEATH @ Feb 11, 2008 - 5:31 PM) [snapback]640328[/snapback]
>
How much would you sell just the strut tower rings for? I may need a bunch of them if what's in my head works out.
Panda - You thinking what I'm thinking?
How much would you sell just the strut tower rings for? I may need a bunch of them if what's in my head works out.
Panda - You thinking what I'm thinking?
Roger that.
Can you sell us 10+ of these or no?
ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI]PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYOSUSP: Tein/Bilstein/SusTech/INT: SS-III SEATS/Toyota Hyper SportsEXT: WRC/TRD/404QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)Its a safety feature so that people like you don't end up killing themselves or everyone around them.Slow down Paul Walker.6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url]
I am currently not offering duplicate parts on stuff that I manufacture. Kind of underminds my desire to profit from my business. If you want a different type of ring other than the exact one that I use, then it is a possibility. Email me a pic of your design, and I will give you an idea if its a go or no go. If it is just a ring with 3 holes, thats fine, my strut bar ring uses special bent ears for welding the cross tubes.
if someone wants i have a front strut bar from a crashed gt that ive bougth for spare peices, its just sligthly bent but i still can take measures of it.
if someone wants them...
if someone wants them...
Here is the progress on the jig so far. Here you can see it with the prototype mounted. Its about 90% done, just needs 2 more bar supports, and clamps.
That will be well worth the money.
QUOTESurprise buttsecks always works fine for me.1994 Toyota Celica ST1977 Harley Sportser XLH1992 Ford F-350 (plow truck)Facebook
edit - thread hijaker.
This post has been edited by DEATH: Feb 17, 2008 - 8:37 PM
This post has been edited by DEATH: Feb 17, 2008 - 8:37 PM
ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI]PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYOSUSP: Tein/Bilstein/SusTech/INT: SS-III SEATS/Toyota Hyper SportsEXT: WRC/TRD/404QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)Its a safety feature so that people like you don't end up killing themselves or everyone around them.Slow down Paul Walker.6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url]
>
PM'd you
QUOTE(DEATH @ Feb 18, 2008 - 12:26 AM) [snapback]642568[/snapback]
>
>
No - we have no intention on getting into your business by buying the rings from you. The idea we have would not be sellable to just anyone - we want to custom make them to each car for an exact fit. Further we want to take the currently available designs a step further. These would only be available to those of us in Houston or surrounding areas.
If you don't want to sell them to us that's OK too. Just let us know a price for 10 blank rings if you want.
>
QUOTE(Qucifer @ Feb 17, 2008 - 12:36 PM) [snapback]642472[/snapback]
>
I am currently not offering duplicate parts on stuff that I manufacture. Kind of underminds my desire to profit from my business. If you want a different type of ring other than the exact one that I use, then it is a possibility. Email me a pic of your design, and I will give you an idea if its a go or no go. If it is just a ring with 3 holes, thats fine, my strut bar ring uses special bent ears for welding the cross tubes.
I am currently not offering duplicate parts on stuff that I manufacture. Kind of underminds my desire to profit from my business. If you want a different type of ring other than the exact one that I use, then it is a possibility. Email me a pic of your design, and I will give you an idea if its a go or no go. If it is just a ring with 3 holes, thats fine, my strut bar ring uses special bent ears for welding the cross tubes.
No - we have no intention on getting into your business by buying the rings from you. The idea we have would not be sellable to just anyone - we want to custom make them to each car for an exact fit. Further we want to take the currently available designs a step further. These would only be available to those of us in Houston or surrounding areas.
If you don't want to sell them to us that's OK too. Just let us know a price for 10 blank rings if you want.
PM'd you
>
x2
QUOTE(6GenCelicaST @ Feb 17, 2008 - 7:11 PM) [snapback]642560[/snapback]
>
That will be well worth the money.
That will be well worth the money.
x2
ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI]PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYOSUSP: Tein/Bilstein/SusTech/INT: SS-III SEATS/Toyota Hyper SportsEXT: WRC/TRD/404QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)Its a safety feature so that people like you don't end up killing themselves or everyone around them.Slow down Paul Walker.6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url]
i'm in for a 2 bar.....
Hey I want the 2 point. How much shipped to 55432?
>
This one.
>
QUOTE(Qucifer @ Sep 30, 2007 - 7:26 PM) [snapback]600345[/snapback]
>
This one.
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
>
Let me do an initial test run before I get you a price on that. I want to pop out 2 3ptr's and 2 2ptr's, so I can get a bulk price on powder coating. I initially was going to offer them in raw metal, but I would rather just get them powder coated so that they are ready to show and go. I am going to finish the jig today, so more to come soon.
QUOTE(bccentaur3 @ Feb 18, 2008 - 6:50 AM) [snapback]642682[/snapback]
>
Hey I want the 2 point. How much shipped to 55432?
>
This one.
Hey I want the 2 point. How much shipped to 55432?
>
QUOTE(Qucifer @ Sep 30, 2007 - 7:26 PM) [snapback]600345[/snapback]
>
This one.
Let me do an initial test run before I get you a price on that. I want to pop out 2 3ptr's and 2 2ptr's, so I can get a bulk price on powder coating. I initially was going to offer them in raw metal, but I would rather just get them powder coated so that they are ready to show and go. I am going to finish the jig today, so more to come soon.
>
QUOTE(Qucifer @ Feb 17, 2008 - 5:19 PM) [snapback]642525[/snapback]
>
Here is the progress on the jig so far. Here you can see it with the prototype mounted. Its about 90% done, just needs 2 more bar supports, and clamps.
Here is the progress on the jig so far. Here you can see it with the prototype mounted. Its about 90% done, just needs 2 more bar supports, and clamps.
my st205 swapandour Beams swap
Forget the powder coating. How much in raw metal?
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
PM'd
put me down for one once we find out prices a long as it fits a 7afe ill be a happy camper
Also would like a 3 point..raw metal is fine. let me know =]
--------------------------------私は銀行に漂う,TRDInspired
pics installed?
Call me a traitor! See if I care. ;)
PMed.
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!