As the title says i want to know if they worth to purchase them. Please tell me your opinion and some pictures installed would be great! Thanks!
Face your fears, Live your dreams!!!
Face your fears, Live your dreams!!!
Does anybody has these intalled: ProCarParts Reverse Glow Gauges??? - 6G Celicas Forums
Face your fears, Live your dreams!!!
there are a few with it here... but wouldnt you ranther have black on blue instead of white on ble
i have it installed. i like them, except you probably want to change your needle colors. culp is selling good LEDS you can use for doing that right now. i still have the stock green and it looks just a little weird :-/
edit: typo
This post has been edited by tonytutino: Oct 30, 2007 - 6:47 PM
edit: typo
This post has been edited by tonytutino: Oct 30, 2007 - 6:47 PM
**If you play My Brute, joing the 6gc.net clan!**--A section of a kid's actual test that had been scanned--
>
funny thing is i am actually debating on getting those exact gauges LOL. i really want some from speedhut but they are just too much $$$
i don't like the other gauges they sell. if i do get them i am only going to use the 3 main sections and just toss the 2 outside sections that don't even glow as well as get a carbon fiber bezel.
QUOTE(dtlwrc @ Oct 30, 2007 - 2:34 PM) [snapback]609761[/snapback]
>
As the title says i want to know if they worth to purchase them. Please tell me your opinion and some pictures installed would be great! Thanks!
As the title says i want to know if they worth to purchase them. Please tell me your opinion and some pictures installed would be great! Thanks!
funny thing is i am actually debating on getting those exact gauges LOL. i really want some from speedhut but they are just too much $$$
i don't like the other gauges they sell. if i do get them i am only going to use the 3 main sections and just toss the 2 outside sections that don't even glow as well as get a carbon fiber bezel.
Call me a traitor! See if I care. ;)
I think black face might be a bit better since our needles are also white... well unless you paint them..
-TomazWSwww.tomazws.com
>
I don't have to paint them because they also have a black version :
But i was thinking the white ones with the CARBON FIBER GAUGE BEZEL on them:
What is your opinion?
This post has been edited by dtlwrc: Oct 31, 2007 - 6:59 AM
QUOTE(tomazws @ Oct 31, 2007 - 3:22 AM) [snapback]609977[/snapback]
>
I think black face might be a bit better since our needles are also white... well unless you paint them..
I think black face might be a bit better since our needles are also white... well unless you paint them..
I don't have to paint them because they also have a black version :
But i was thinking the white ones with the CARBON FIBER GAUGE BEZEL on them:
What is your opinion?
This post has been edited by dtlwrc: Oct 31, 2007 - 6:59 AM
Face your fears, Live your dreams!!!
i had them and they look awesome.
Turbo install made possible thanks toTeamJ.D.M.officially 5SFTE junior member~*MuH NeW RiDe*~
>
like i said that is exactly what i plan on getting on mine then painting the needles blue with some fingernail polish
QUOTE(dtlwrc @ Oct 31, 2007 - 5:59 AM) [snapback]610001[/snapback]
>
>
I don't have to paint them because they also have a black version :
But i was thinking the white ones with the CARBON FIBER GAUGE BEZEL on them:
What is your opinion?
>
QUOTE(tomazws @ Oct 31, 2007 - 3:22 AM) [snapback]609977[/snapback]
>
I think black face might be a bit better since our needles are also white... well unless you paint them..
I think black face might be a bit better since our needles are also white... well unless you paint them..
I don't have to paint them because they also have a black version :
But i was thinking the white ones with the CARBON FIBER GAUGE BEZEL on them:
What is your opinion?
like i said that is exactly what i plan on getting on mine then painting the needles blue with some fingernail polish
Call me a traitor! See if I care. ;)
Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off.
Maybe some of you guys that have 'em installed can take som pics?
>
Yes, that would be great! I especialy want to see how they look at day!
This post has been edited by dtlwrc: Nov 1, 2007 - 4:56 AM
QUOTE(peterkos @ Nov 1, 2007 - 4:42 AM) [snapback]610319[/snapback]
>
Maybe some of you guys that have 'em installed can take som pics?
Maybe some of you guys that have 'em installed can take som pics?
Yes, that would be great! I especialy want to see how they look at day!
This post has been edited by dtlwrc: Nov 1, 2007 - 4:56 AM
Face your fears, Live your dreams!!!
>
not slide off, you'll need to pry it with a fork or something similar, and oh after ur done with them getting them recarlibrated is a pain in the a$$
QUOTE(94CelicaDragon @ Nov 1, 2007 - 9:00 AM) [snapback]610183[/snapback]
>
Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off.
Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off.
not slide off, you'll need to pry it with a fork or something similar, and oh after ur done with them getting them recarlibrated is a pain in the a$$
98% completion---aaRon
>
iused the two spoon method one either side of the needle center and gently prise up equally and if you take the needle stop out first your needle srings back mark where it stop and replace in same position pull forward and replace stop it worked for me anyway
QUOTE(94CelicaDragon @ Oct 31, 2007 - 7:00 PM) [snapback]610183[/snapback]
>
Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off.
Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off.
iused the two spoon method one either side of the needle center and gently prise up equally and if you take the needle stop out first your needle srings back mark where it stop and replace in same position pull forward and replace stop it worked for me anyway
I've got the ones with the black faces from procarparts, can see pics here in this thread.
http://www.6gc.net/forums/index.php?showtopic=42984&hl=
I didn't remove the needles, the faces just slide overtop of the existing needles, and I used thin double sided tape (like carpet tape) to hold them down to the old gauges. Took about an hour from start to finish including wiring.
Samantha
>
http://www.6gc.net/forums/index.php?showtopic=42984&hl=
I didn't remove the needles, the faces just slide overtop of the existing needles, and I used thin double sided tape (like carpet tape) to hold them down to the old gauges. Took about an hour from start to finish including wiring.
Samantha
>
QUOTE(stevest202 @ Nov 2, 2007 - 5:15 PM) [snapback]610743[/snapback]
>
>
iused the two spoon method one either side of the needle center and gently prise up equally and if you take the needle stop out first your needle srings back mark where it stop and replace in same position pull forward and replace stop it worked for me anyway
>
QUOTE(94CelicaDragon @ Oct 31, 2007 - 7:00 PM) [snapback]610183[/snapback]
>
Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off.
Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off.
iused the two spoon method one either side of the needle center and gently prise up equally and if you take the needle stop out first your needle srings back mark where it stop and replace in same position pull forward and replace stop it worked for me anyway
>
The black ones look really nice at night!!! Anyone with a day picture of white or black gauges???
Thanks!
QUOTE(Velliety @ Nov 3, 2007 - 1:41 PM) [snapback]610863[/snapback]
>
I've got the ones with the black faces from procarparts, can see pics here in this thread.
http://www.6gc.net/forums/index.php?showtopic=42984&hl=
I didn't remove the needles, the faces just slide overtop of the existing needles, and I used thin double sided tape (like carpet tape) to hold them down to the old gauges. Took about an hour from start to finish including wiring.
Samantha
>
I've got the ones with the black faces from procarparts, can see pics here in this thread.
http://www.6gc.net/forums/index.php?showtopic=42984&hl=
I didn't remove the needles, the faces just slide overtop of the existing needles, and I used thin double sided tape (like carpet tape) to hold them down to the old gauges. Took about an hour from start to finish including wiring.
Samantha
>
QUOTE(stevest202 @ Nov 2, 2007 - 5:15 PM) [snapback]610743[/snapback]
>
>
iused the two spoon method one either side of the needle center and gently prise up equally and if you take the needle stop out first your needle srings back mark where it stop and replace in same position pull forward and replace stop it worked for me anyway
>
QUOTE(94CelicaDragon @ Oct 31, 2007 - 7:00 PM) [snapback]610183[/snapback]
>
Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off.
Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off.
iused the two spoon method one either side of the needle center and gently prise up equally and if you take the needle stop out first your needle srings back mark where it stop and replace in same position pull forward and replace stop it worked for me anyway
The black ones look really nice at night!!! Anyone with a day picture of white or black gauges???
Thanks!Face your fears, Live your dreams!!!
>
do NOT remove the needles. doing that will damage your gauge cluster.
these overlays are made to slip over your existing needles, without removing them.
QUOTE(lubu @ Nov 1, 2007 - 1:24 PM) [snapback]610386[/snapback]
>
>
not slide off, you'll need to pry it with a fork or something similar, and oh after ur done with them getting them recarlibrated is a pain in the a$$
>
QUOTE(94CelicaDragon @ Nov 1, 2007 - 9:00 AM) [snapback]610183[/snapback]
>
Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off.
Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off.
not slide off, you'll need to pry it with a fork or something similar, and oh after ur done with them getting them recarlibrated is a pain in the a$$
do NOT remove the needles. doing that will damage your gauge cluster.
these overlays are made to slip over your existing needles, without removing them.
15PSI - 30MPG - Megasquirt Tuned
here is my old setup, with the white reverse glow from ebay.
15PSI - 30MPG - Megasquirt Tuned
>
Here I have white:
And here you can se black ones:
QUOTE(dtlwrc @ Nov 3, 2007 - 8:35 PM) [snapback]610871[/snapback]
>
...
The black ones look really nice at night!!! Anyone with a day picture of white or black gauges??? Thanks!
...
The black ones look really nice at night!!! Anyone with a day picture of white or black gauges???
Thanks!Here I have white:
And here you can se black ones:
No more replicas... This is evolution... This isSS-four:)________[Featured Celica of 6gc.net @ 2010]_________
Thanks Malpaso! These pictures are exactly what i was asking! Many thanks!!!
Face your fears, Live your dreams!!!
>
i have that set up exatly and it looks good.
QUOTE(dtlwrc @ Oct 31, 2007 - 5:59 AM) [snapback]610001[/snapback]
>
>
I don't have to paint them because they also have a black version :
But i was thinking the white ones with the CARBON FIBER GAUGE BEZEL on them:
What is your opinion?
>
QUOTE(tomazws @ Oct 31, 2007 - 3:22 AM) [snapback]609977[/snapback]
>
I think black face might be a bit better since our needles are also white... well unless you paint them..
I think black face might be a bit better since our needles are also white... well unless you paint them..
I don't have to paint them because they also have a black version :
But i was thinking the white ones with the CARBON FIBER GAUGE BEZEL on them:
What is your opinion?
i have that set up exatly and it looks good.
Myspace Me
>
It would be great if you could post some pictures of your interior to see how they look on the car! Thanks!
QUOTE
>
i have that set up exatly and it looks good.
i have that set up exatly and it looks good.
It would be great if you could post some pictures of your interior to see how they look on the car! Thanks!
Face your fears, Live your dreams!!!
This is some sexy sh*t, maybe I'm going for these as well!
i have them to
>
So what will happen if i instal these ones from speedhut? My needle will saw the wrong speed?
This post has been edited by dtlwrc: Nov 6, 2007 - 7:35 AM
QUOTE(lagos @ Nov 3, 2007 - 3:44 PM) [snapback]610881[/snapback]
>
>
do NOT remove the needles. doing that will damage your gauge cluster.
these overlays are made to slip over your existing needles, without removing them.
>
QUOTE(lubu @ Nov 1, 2007 - 1:24 PM) [snapback]610386[/snapback]
>
>
not slide off, you'll need to pry it with a fork or something similar, and oh after ur done with them getting them recarlibrated is a pain in the a$$
>
QUOTE(94CelicaDragon @ Nov 1, 2007 - 9:00 AM) [snapback]610183[/snapback]
>
Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off.
Since we're on the topic of changing gauge backround's, I have a stupid question. The needle's, rpm, mph, temp and fuel, How do those come off? do they slid off? Im just wondering cause I had a bad experience with a previous car that I had, the **** snapped off.
not slide off, you'll need to pry it with a fork or something similar, and oh after ur done with them getting them recarlibrated is a pain in the a$$
do NOT remove the needles. doing that will damage your gauge cluster.
these overlays are made to slip over your existing needles, without removing them.
So what will happen if i instal these ones from speedhut? My needle will saw the wrong speed?
This post has been edited by dtlwrc: Nov 6, 2007 - 7:35 AM
Face your fears, Live your dreams!!!
>
Anyone???
QUOTE
>
So what will happen if i instal these ones from speedhut? My needle will saw the wrong speed?
So what will happen if i instal these ones from speedhut? My needle will saw the wrong speed?
Anyone???
Face your fears, Live your dreams!!!
no way to tell without seeing your gauges. they should have a set that match your gauges though.
Call me a traitor! See if I care. ;)
>
My gauges are the classic ones, with maximum speed 240Km! I don't have miles!
This post has been edited by dtlwrc: Nov 8, 2007 - 4:45 AM
QUOTE(goferris @ Nov 8, 2007 - 3:16 AM) [snapback]612266[/snapback]
>
no way to tell without seeing your gauges. they should have a set that match your gauges though.
no way to tell without seeing your gauges. they should have a set that match your gauges though.
My gauges are the classic ones, with maximum speed 240Km! I don't have miles!
This post has been edited by dtlwrc: Nov 8, 2007 - 4:45 AM
Face your fears, Live your dreams!!!
>
if you look at the speed at positions 9 , 12, and 3 o'clock, if they match the speed of your current gauge, i guess is ok, but if not iwould not recommend,
this one goes to 280 vs yours of 240. right there, you can see a difference...
QUOTE(dtlwrc @ Nov 8, 2007 - 4:44 AM) [snapback]612272[/snapback]
>
>
My gauges are the classic ones, with maximum speed 240Km! I don't have miles!
>
QUOTE(goferris @ Nov 8, 2007 - 3:16 AM) [snapback]612266[/snapback]
>
no way to tell without seeing your gauges. they should have a set that match your gauges though.
no way to tell without seeing your gauges. they should have a set that match your gauges though.
My gauges are the classic ones, with maximum speed 240Km! I don't have miles!
if you look at the speed at positions 9 , 12, and 3 o'clock, if they match the speed of your current gauge, i guess is ok, but if not iwould not recommend,
this one goes to 280 vs yours of 240. right there, you can see a difference...
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.