I was looking for rims in a 17 or 18 x 9.5 in a 5x100 bolt pattern with an offset around +10. I can't find anything readily available, even through the v-dub forums. I was looking at gramlight 57f's in a concave face but those have to be made and are a little more than I really wanna spend. If anyone knows of any sites with rims like these or custom offset rims anything would be great.
thanks in advance
-Bryan

You wont find any Japanese rims for that. 5x100 is usually only considered as a Subaru wheel. There are a few 32,35,38 offsets with 8 and 8.5J rims and thats it.

But 9.5J with a ET of 10

Thats a WHOPPING 41mm that the wheel extends from a perfectly flush 8J ET 32 rim. You planning on making the car 80mm wider?

>

maybe, and that is the conservative offset. I would really like an 1? x 10 with an offset around 0 but I'll run into tire clearance issues and don't really wanna raise the car any higher as I'm at a near peferct 50/50 weight diagonally and I'm happy with the roll center and the camber it doesn't pull out. And they dont have to be "japanese rims" just something that looks like a gramlight 57 (the 5 spoke design and clear big calipers and you can paint anything bronze and I'd like a concave face but I'm just being picky.) light weight is good, and without me having to go with something like CCW or HRE because I'm not rich.
-Bryan

This post has been edited by CelicaB: Jan 6, 2008 - 2:25 PM