CHANGE OF PLANS!

Okay guys, HUGE update. I've decided that there were way too many people and places to see in just one month of traveling around, so I've come up with a solution to the problem, which is centered around this:



That's right, this baby is sitting in my driveway RIGHT NOW. In fact, I'm selling my house and all my earthly belongings that don't fit in the RV and I'm going on the road INDEFINITELY! I'll be doing wiring conversions in the RV as I go and I might bring a tig-welder along as well to do on-site fabrication.

With this setup, I'll be able to take my time and travel around the US, get to see the country, live very simply for a while, and get to meet lots of people from the forums and from shops that I work with. So keep adding yourselves to the list, we'll be making our way around slowly but surely!

PS: Anyone want to buy a nice house in Savannah, totally renovated, fully furnished for $159k? How about a 2004 Toyota Tundra 4-door Limited? Or a '93 Lexus GS300 maybe? drtweak@phoenixtuning.com

-Doc



This post has been edited by Dr_Tweak: May 6, 2008 - 5:45 PM

well if your passing through Windsor *beside detroit*, or Toronto and im in town, your welcome to stay at my place for a night

swing by philly/if your taking 95..its right there...litteraly..maybe me and tiga and lagos(art) can get together...since you will most likely be doing my harness i would like to meet the man himself so make it a point to stop for a little...city of brotherly love..hahaha

We got a lot of people around Houston if you want to go that far South.

swing by IL and help me install my tranny ^^ ahah If you do swing by IL my doors are open to you

if u in southern cali..let us know!

>
x2!

i already know you your welcome to party with me if you pass through mass.

might make you stay and do the swap if you come thru north carolina, im buying the eng in 3 weeks lol, was planning on setting up an apointment late march early april

if you're coming to tx. Come check out 3 of my mr2. one stock, one in the process of swapping in a 3sgte, and one in the process of a 3vz. I kind of need help rebuilding my VG30 DE for my 90 Z if you can help. ;D

>

I'll second that and be sure to bring whatever you may need to fix the speedo problem on my swap
The GF and I have an extra bedroom if you want to save some Hotel money.

Alright here is the initial list, feel free to correct/add to it. I will say right up-front that I will not be able to make it to see EVERYONE, so if you get missed, don't feel bad.

Maryland/DC:
insaneintenti0n (tercelonline)
rjoe (tercelonline) *work on tercel
alfradio (tercelonline)
lilbit01 (trdforums)
MD4e

PA:
95st-celica (6gc) Philadelphia
burnyd (celicatech) Pittsburgh

Montreal:
Loki_V2 (tercelonline)

Toronto:
Gizmo (tercelonline)
Valo6 (6GC)
Anth505 (supramania)
rayray1 (trdforums)
REN69 (toyotanation)

Washington State:
kennymp3 (tercelonline) Vancouver
pimptrizkit (supramania) Vancouver
CorollaBest (trdforums)
Sean (celicatech)
geebes (celicatech) Spokane

Mass:
Tercel Drifter (tercelonline) Boston
Heavy_D (tercelonline) Worcester
x_itchy_b_x (6gc) Boston

Louisiana:
MadCat (tercelonline) Denham Springs
draenor (tercelonline)

New Jersey:
dero908 (tercelonline)
Rolla95 (trdforums) Deptford

Montana:
Red Hawk (tercelonline) Fargo *install clutch

Texas:
Havok1997GT (6gc) Houston
My2Celi (6gc) Arlington
death (6gc) *Fix speedo problem
MKIIINA (supramania) DFW
ARES (trdforums) Houston
Trouble (club4ag) Austin
cribbj (lextreme) Houston *Wiring harness work on 1UZ/Supra
nyana107 (celicatech) Dallas

Illinois:
Celicam8 (6gc)
wrongboy (celicatech) Chicago

SOCAL:
xs94st (6gc)
j0e_p3t (6gc)

California:
livingtheword777 (club4ag)

North/South Carolina:
illneversellmycelli (6gc) Statesville
Carolina91GT-S

Alabama:
The1 (supramania) Montgomery
donteatbugs (celicatech) Monroeville

Indiana:
Clueless (supramania) Columbus
VikingJZ (celicatech) northern Indiana

Vancouver, BC:
JustinGotA1j (supramania)

New Mexico:
zachm611 (supramania) Alamogordo
SW20Boost (club4ag)

Kentucky:
st2b (supramania)

Alberta Canada:
Keros (supramania) Calgary

New York:
vibebreaker (trdforums) NYC *auto/manual conversion, intake manifold, etc

Colorado:
MovieSTAR (trdforums) Denver
Hiko (celicatech) Boulder

Arizona:
n0c3lt (celicatech) Phoenix

Utah:
Luni (celicatech)

Tennessee:
Murgatroy (celicatech) Knoxville

So there's been a little chatter about possibly having a PNW meet after the rain stops... somewhere feasible for us "down south" in the Salem to Portland area, as well as those "up north" in Seattle. Maybe we should plan it around when you're coming this direction, you could kill several birds with one stone!

Maybe us Houston guys can make things easier for you and be in one place at the same time. I see you need to do some work as well when your here - I have a garage you are welcome to use if you need it.

If you happen to pass by Raleigh, NC on your way up North......hit me up. I am sure you still have my contact info, this is Anh-Tuan by the way.

That is so awesome! How much time off do you have to do all this? I've always wanted to the same thing.

Funny, i've been traveling more around the world than i have in my own home country.

>

I'd be down for it. Let us know if you do end up comming to Washington.

ha about may huh... if plans prevail i'll be amid my 3sgte swap... your more than welcome to swing by anytime though. location - cincinnati, ohio

x2 for Houston. It's a big city but we can all meet up somewhere. If you're doing this close to summer I might suggest doing something at night. The daytime here in the summer can get, well, dangerous.

Depending on when you get out to the east coast, we should probably try to setup another DWG meet or something. That way you can meet the whole east coast crew in one shot.

u can count me down as toronto/michigan cuz im literaly a stones throw away from the bridge to Detroit.

You'll be missing one of the best parts of the US if you miss Oregon. =] And we could always put you up for a night...

>

cant forget about your future repeat customer! lol

>
You can count me in I'm always up to meeting new people.

Maybe if I get a good tax return you can help me put on a turbo ?

Yeah, if you end up near Raleigh let both of us know or if you are headed to Charlotte/Statesville, I may be able to swing that way cause it's only a couple hrs

Your coming to Louisiana I see. Denham Springs is 15 min from where im at in Baton Rouge.

>


Dude, you are amazing. I think that is really awesome that you are doing that and also very generous to anyone who might seek your aid (even if paid). To see someone with a real passion and doing that has my acknowledgement and respect. I know you have major rep. Be safe out there.


---Faust

If you are going up the east coast into canada, You have a place to crash in VT, I'm 15 mins from burlington where I-89 flows through.

-Darin

Well it looks like you have a stop in Calgary, Alberta, Canada already. So if you are here I would like to meet you.
Might get you to help build the 5SFTE if I haven't already got it installed by the time you get here! P.S. When is the chromoly flywheel going to be ready?