so me and a friend are wondering can we take off the clutch housing and not drop the motor?
clutch install question - 6G Celicas Forums
>
http://www.6gc.net/howto/swap_auto_transmission_to_manual
Dont think so~
QUOTE(my96celica @ Feb 20, 2008 - 2:06 PM) [snapback]643706[/snapback]
>
so me and a friend are wondering can we take off the clutch housing and not drop the motor?
so me and a friend are wondering can we take off the clutch housing and not drop the motor?
http://www.6gc.net/howto/swap_auto_transmission_to_manual
Dont think so~
QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM)Via FB: fcuking awsome!!! D-man FTW!QUOTE (DEATH @ Nov 11, 2008 - 5:40 PM)Damn D-Man - most impressive.QUOTE (99GT @ Nov 14, 2008 - 4:04 PM)D-Man's post should be a stickyQUOTE (samir0189 @ Nov 4, 2008 - 10:50 AM)LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts.
3 of the 4 engine mounts are bolted to the tranny, you will need to support the engine when the tranny is out.
my st205 swapandour Beams swap
>
I did see that so am I going to either jack the motor down or try to take the housing off and leave the motor untouched.but do you think I could just take the housing off to change the clutch?this is my first clutch im doing myself
happy ass hell
QUOTE(Batman722 @ Feb 20, 2008 - 2:43 PM) [snapback]643716[/snapback]
>
3 of the 4 engine mounts are bolted to the tranny, you will need to support the engine when the tranny is out.
3 of the 4 engine mounts are bolted to the tranny, you will need to support the engine when the tranny is out.
I did see that so am I going to either jack the motor down or try to take the housing off and leave the motor untouched.but do you think I could just take the housing off to change the clutch?this is my first clutch im doing myself
happy ass hell
so just unbolt 3 of the 4 leave the passanger side alone while disconnecting the housing from the engine havin the engine supported can we lower the tranny without lowering the rest of the engine to change the clutch?
yes. You also need to remove the axles first.
my st205 swapandour Beams swap
Ya thanks man I love this site tell me everything I ever need to know I now go to learn how to put this stage 2 in thanks to all again let you know how it went
One question... whats the torque specs for the pressure plate?
Fred"...Armed with backbone and busted zoo gates, promising you from the bottom of my harmonica pocket - FOREVER - you will never have another lonely holiday..."