hey can anyone of the 5sfte owners please tell me which vacuum hole fromthe 5sfe engine you need to hook the vacuum line up to read boost. thanks

ohh one more thing....... on the ct26 turbo wastegate there two vacuum supplies.. one goes with the turbo vacuum and what does the other one do??? i see some people just block it off.. can that be the vacuum supply for the boost?

help pls

>
there is an extra nipple on the back of the intake manifold use can use as a good source for a boost gauge.

for the wastegate, one line goes from the turbo, to the wastegate, the other gets capped off.

>
what he said. On my car there actually were two unused nipples on my intake manifold that had caps on them. I used one for the boost gauge and the other for the BOV.

for the wastegate, the nipple pointing towards the turbo goes to the nipple off the side of the turbos compressor housing. the other is supposed to be capped. however, I left it uncapped for a while and hit higher boost levels. I had it uncapped and hit 10-12 PSI, and then I capped it and only hit 7-8 PSI. since I didn't want to buy a manual boost controller just yet, I just uncapped it again for the higher boost pressure

ok thanks guys