so ive read thru this many times, and i am still lost. Its obvious that you cant use the mr2t transmission because it is two short as kuya has stated. So does that mean that you could use the e series 6cyl camry transmission by itself and be safe? Now what Kuya was talking about on mixing the two was so that he could have the limited slip of the mr2 mixed with teh correct size of the camry. I am not to worried about the lsd right now, i just want the e series tranny so that it can be replaced while the engine is out of the car. So to sum my question up, can the camry 6 cyl mt be used w/o the mr2t parts?
3S-GTE Trannies - 6G Celicas Forums
You can use the E series trans from the MR2 Turbo or Camry, or the S series trans from the 5F powered cars.
ScottWest Michigan
this might be a stupid question but why cant you use the jdm tranny that comes with the motor?? >
>
yea your 3sgte is cool but ill stick to my 7agte
-nik+Mar 15, 2004 - 9:15 PM
i know that >
> just dont hook up the rear drive shaft and still use the front shafts
yea your 3sgte is cool but ill stick to my 7agte
the transfer box or whatever would be in the way i believe, amongst other things.
and to blkgt, the mr2 tranny can be used. I dont know what your saying about it being to small, all you need to do is use the different axcels, half the axcels from the mr2, and half the axcels from the camry.
and to blkgt, the mr2 tranny can be used. I dont know what your saying about it being to small, all you need to do is use the different axcels, half the axcels from the mr2, and half the axcels from the camry.
-Chrobis+Mar 16, 2004 - 12:29 AM
-nik+Mar 15, 2004 - 9:41 PM
i havn't seen an awd tranny thats why i ask the question I always see guys talking about the mr2 turbo tranny or the v6 camry tranny i just wanted to know if anyone stuck with the origenal gt4 tranny >
>
yea your 3sgte is cool but ill stick to my 7agte
My head hurts.
nik,
From my understanding of AWD and FWD, owning both of the same car, the AWD loses roughly 1/4 HP in transferring the power to the rear wheels. I believe you can hook up the AWD tranny to car, however you'd lose tremdious power going to nothing... and what good is that. However, I dont even know if theres room for the AWD tranny on the FWD body.
Then again... make it really easy. Import a GT4, switch VIN plates, tint your windows really really dark and have fun for at least a week. Its a whole lot easier than all this swap stuff. lol. And for all you over-thinkers... dont take this serious.
From my understanding of AWD and FWD, owning both of the same car, the AWD loses roughly 1/4 HP in transferring the power to the rear wheels. I believe you can hook up the AWD tranny to car, however you'd lose tremdious power going to nothing... and what good is that. However, I dont even know if theres room for the AWD tranny on the FWD body.
Then again... make it really easy. Import a GT4, switch VIN plates, tint your windows really really dark and have fun for at least a week. Its a whole lot easier than all this swap stuff. lol. And for all you over-thinkers... dont take this serious.
thanks for explaining it that helps >
>
yea your 3sgte is cool but ill stick to my 7agte
-kuya1284+Aug 29, 2003 - 12:23 AM
-raven_101+Mar 31, 2004 - 8:07 AM
-raven_101+Mar 31, 2004 - 8:07 AM
-kuya1284+Mar 31, 2004 - 9:54 AM
99 project version 3.0.. hello SEMA 2010 =)
ok ok , so i cant just use a straight 6cyl camry transmission. I MUST mate it with the mr2. plus that gives me the limited slip option?
Itd be so much nicer if the camry would just work by itself >
>
Itd be so much nicer if the camry would just work by itself >
I have heard that you can use the gt4 trany and make it fwd by removing the rear output shaft and making an cover to seal it up is this recomended?
no thats not a very good idea.
MyFlickrMyeBay_Perpetual Aperture_
Read NEVERSTOP's post in this thread. It makes sense why using the AWD tranny is not a good idea.
QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.
Hi.
I have ST202 celica 3S-GE with 129kw. I need new gearbox. My old ones code is E56, wtf is that ? and which transmissions are compatible with this one ? My car is from Germany and im living in Finland.
Thanks.
I have ST202 celica 3S-GE with 129kw. I need new gearbox. My old ones code is E56, wtf is that ? and which transmissions are compatible with this one ? My car is from Germany and im living in Finland.
Thanks.
what,.... i am using an awd tranny and it makes perfect sense
This post has been edited by yungazzdriver: May 4, 2006 - 7:38 AM
This post has been edited by yungazzdriver: May 4, 2006 - 7:38 AM
>
Where you get that code from? All ST202's came with S-54 trannies. Just look for another Celica with a 3S-GE and take the tranny off of that.
QUOTE(Belhan @ May 4, 2006 - 7:29 AM) [snapback]429964[/snapback]
>
Hi.
I have ST202 celica 3S-GE with 129kw. I need new gearbox. My old ones code is E56, wtf is that ? and which transmissions are compatible with this one ? My car is from Germany and im living in Finland.
Thanks.
Hi.
I have ST202 celica 3S-GE with 129kw. I need new gearbox. My old ones code is E56, wtf is that ? and which transmissions are compatible with this one ? My car is from Germany and im living in Finland.
Thanks.
Where you get that code from? All ST202's came with S-54 trannies. Just look for another Celica with a 3S-GE and take the tranny off of that.
>
I found it from that plate where is written all information about ur car, like chassis code and stuff.(i dont know whats the right name in english) Anyway its under the hood
Checked it with local toyota serviceman after he told that there is 2 kind of transmissions for st202. We have only this celica in this town(20k citizens). So even the service cant tell me all what i want to know
Because this is the first one which they need to handle.
Anyway i catch one tranny from finland which got about 40000miles on it. It costs 600$. Much cheaper than repair the old one
btw. we have crazy prices for these cars. I paid ~16000$ 2years ago...
QUOTE(BLADDER_MASTER @ May 4, 2006 - 7:17 PM) [snapback]430126[/snapback]
>
>
Where you get that code from? All ST202's came with S-54 trannies. Just look for another Celica with a 3S-GE and take the tranny off of that.
>
QUOTE(Belhan @ May 4, 2006 - 7:29 AM) [snapback]429964[/snapback]
>
Hi.
I have ST202 celica 3S-GE with 129kw. I need new gearbox. My old ones code is E56, wtf is that ? and which transmissions are compatible with this one ? My car is from Germany and im living in Finland.
Thanks.
Hi.
I have ST202 celica 3S-GE with 129kw. I need new gearbox. My old ones code is E56, wtf is that ? and which transmissions are compatible with this one ? My car is from Germany and im living in Finland.
Thanks.
Where you get that code from? All ST202's came with S-54 trannies. Just look for another Celica with a 3S-GE and take the tranny off of that.
I found it from that plate where is written all information about ur car, like chassis code and stuff.(i dont know whats the right name in english) Anyway its under the hood
Anyway i catch one tranny from finland which got about 40000miles on it. It costs 600$. Much cheaper than repair the old one