Smitty2145

#1

Hey,
I just purchased a c-one front bumper replica and brought it into the body shop in my town and they told me that some drastic changes would need to be made to my car for this bumper to even fit. a few things that they listed off included: cutting the fenders, removing the impact bars, getting new turns and side markers, as well as making new brackets for the headlamps. I was wondering if anyone knows of any c-one or zyclone bumpers that have good fitment and that don't require extensive work.

-smitty2145

bccentaur3

#2

Why are they saying that they need to cut the fenders? I hope they don't think that the bottom lip on the bumper that wraps around the fender is bad fitment.

Where did you get the bumper?

---

98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!

punkuup5150

#3

they r telling you the truth for allmost everything u dont have to cut your fenders and i dont think u have to make new headlight mounts. but u can modify the inpact bar to fit if im right and ull have to modify the turns to fit but u might want to source some st205 turns or modify the 96-99 turns to fit like im planning on doing.

D-Man

#4

>

QUOTE(Smitty2145 @ Apr 2, 2008 - 3:21 PM) [snapback]660903[/snapback]

>
Hey,
I just purchased a c-one front bumper replica and brought it into the body shop in my town and they told me that some drastic changes would need to be made to my car for this bumper to even fit. a few things that they listed off included: cutting the fenders, removing the impact bars, getting new turns and side markers, as well as making new brackets for the headlamps. I was wondering if anyone knows of any c-one or zyclone bumpers that have good fitment and that don't require extensive work.

-smitty2145

go get a second opinion from another shop. That (IMO) sounds like bull~

I know for a fact that most lips fit over the fenders, and use the same splash guard mounts to hold in place. If they cut that fender than there'll be no way to hold the new bumper up.

go tell those people that, then tell em; "Duh~"



find another shop; or do it yourself.

---

QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM)Via FB: fcuking awsome!!! D-man FTW!QUOTE (DEATH @ Nov 11, 2008 - 5:40 PM)Damn D-Man - most impressive.QUOTE (99GT @ Nov 14, 2008 - 4:04 PM)D-Man's post should be a stickyQUOTE (samir0189 @ Nov 4, 2008 - 10:50 AM)LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts.

808celica

#5

shops are BS. go DIY fun experience. plus its only a bumper. yeah some mods needs to be done. but do the mods on the bumper IMO since its f/g.

---

I don't normally drive fast, but when I do its on a curvy section of this island

D-Man

#6

Yeah, if you got a fiberglass C-One, then grab your balls and do it yourself. its not hat hard, just gotta get under there and remember where all your screws go.

If you get scared of loosing em, grab a box of cheap-o sandwich bags (89cents for like 300) from your local run-down grocery store (i prefer Fiesta ) and sharpie the bags with the location of where they went; then keep your corresponding screws in there.

sounds dumb, but if it's the first time your taking it apart, then don't be scared, be smart.

knock it out and take some pics for us we love our pics here on 6gc

---

QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM)Via FB: fcuking awsome!!! D-man FTW!QUOTE (DEATH @ Nov 11, 2008 - 5:40 PM)Damn D-Man - most impressive.QUOTE (99GT @ Nov 14, 2008 - 4:04 PM)D-Man's post should be a stickyQUOTE (samir0189 @ Nov 4, 2008 - 10:50 AM)LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts.

808celica

#7

x2 on pics i love to see how everyones car is soo much better than my POS

---

I don't normally drive fast, but when I do its on a curvy section of this island

nik

#8

i bought mine off ebay and the fitment sucked i had to do a lot of trimming and shaving around the back part of the bumper
and i had to heat the fiberglass with heat lamps to stretch it











This post has been edited by nik: Apr 8, 2008 - 12:34 PM

---

yea your 3sgte is cool but ill stick to my 7agte

D-Man

#9

argh... you people and your bawlin ass body kits.... i hate being so poor...

My wife needs to go back to work already i'm tired of being the only one with a job

---

QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM)Via FB: fcuking awsome!!! D-man FTW!QUOTE (DEATH @ Nov 11, 2008 - 5:40 PM)Damn D-Man - most impressive.QUOTE (99GT @ Nov 14, 2008 - 4:04 PM)D-Man's post should be a stickyQUOTE (samir0189 @ Nov 4, 2008 - 10:50 AM)LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts.

playr158

#10

if you have to cut fenders and headlight brackets to put on a bumper....YOU ARE DOING IT WRONG

pandakid

#11

i only thing to put my kit on was making a smaller impact bar to fit,i didn't have to cut anything off.I would trying going to another body shop

st202gt

#12

I have it on my car about 2 year now... I bought it when it first came out C1 replic..
You will need to take off yours front bumper support or trim down back side of the kit.
For the bumper signal light, you will need to make custom bracket or make fiberglass a mold of signal light.
for the two two side, you will need to drill hole into side of fender.. check out my profile.

This post has been edited by st202gt: Apr 4, 2008 - 1:21 PM

Zelstin

#13

A temporary fix for the turns that i did cause I'm broke is drill a hole through the housing and bolt the whole thing to a tab on the bumper. It surprisingly doesn't look too bad.

Smitty2145

#14

Does anyone know what needs to be modified with the 96-99 turns so that they can fit into the c1 kit. And also what modifications need to be done to the impact bar?

Pipo

#15

I eliminated my bar and put my originals signals with a screw with a butterfly clamp behind it...


This post has been edited by Pipo: Oct 15, 2008 - 3:42 PM

njccmd2002

#16

>

QUOTE (D-Man @ Apr 2, 2008 - 9:23 PM)

>then grab your balls and do it yourself. its not hat hard, just gotta get under there and remember where all your screws go.

---

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.

CelicaST_CALI

#17

>

QUOTE (D-Man @ Apr 4, 2008 - 8:18 AM)

> i hate being so poor...

My wife needs to go back to work already i'm tired of being the only one with a job

sell that park bench and put a good looking mod on

have u looked at the bumper??how far off is it?

This post has been edited by CelicaST_CALI: Oct 16, 2008 - 12:33 AM

---

BANNED. for life, you moron.

xredjokerx

#18

dont get a shop that'll get it looking like this..

http://www.6gc.net/forums/index.php?showtopic=62618