Over 1M Posts • 84K Topics • 9K Authors

How to take off the glove box? My blower isnt working.. - 6G Celicas Forums

Topic #57710 12 posts Started by emachine
My blower stopped working yesterday and everything else still works fine. I think its just a wire or something?

It stopped working about 2 weeks ago also, but I smacked the dashboard above the glovebox and it worked fine for a while, but now it's totally dead, how should i go about fixing this?

any help is appreciated as it's gotten really cold in the mornings here in atlanta xD
Open the glove box and there should be some screws to remove and the side trim on the door should pop off too. IIRC there are 3 bolts holding the glove box up.

This post has been edited by bccentaur3: Apr 16, 2008 - 10:48 AM

98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
I believe you have to remove two trim screws first, and then the 3 bolts (w/a socket, 10mm IIRC) to get the glove box out. 1 bolt is bottom rt. corner, 1 bottom left, and I forget where the third is. Oh and there's a tiny trim screw in the middle I think, by the latch.
>
QUOTE(GriffGirl @ Apr 16, 2008 - 11:15 AM) [snapback]665117[/snapback]
>
I believe you have to remove two trim screws first, and then the 3 bolts (w/a socket, 10mm IIRC) to get the glove box out. 1 bolt is bottom rt. corner, 1 bottom left, and I forget where the third is. Oh and there's a tiny trim screw in the middle I think, by the latch.

Perfect - the third "mystery" bolt is on the left side in a place where the view is obstructed somehow [working from memory here].
Sounds like you just have a bad connection there. Should be easy to fix.

ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI]PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYOSUSP: Tein/Bilstein/SusTech/INT: SS-III SEATS/Toyota Hyper SportsEXT: WRC/TRD/404QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)Its a safety feature so that people like you don't end up killing themselves or everyone around them.Slow down Paul Walker.6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url]
check my post.

there are 3 screws holding it...

the glovebox is held by 4 screws on the top and one on each side. be careful when you remove it...

>
QUOTE(njccmd2002 @ Feb 23, 2008 - 10:55 PM) [snapback]645036[/snapback]
>
well, having problems attaching from phtobucket.

I took out the ac blower. Yes to all, its located underneath the glove box (behind). Looks like this...

IPB Image

after a while, and 4 screws out.. (leave the ones in the middle alone)

IPB Image

loks something nasty like this.......

IPB Image

after careful cleaning...

IPB Image


now its installed, and not thrwing any dust.... biggrin.gif biggrin.gif . there you go, this is step one....

Please try to keep the thread clean....

I have a little mod i will post tomorrow....

edit: pics into thumbnails.


Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
That's right, the mystery bolt is behind the trim, that's why you have to remove trim bolts, so you can pull the trim out of the way. It's on the left side when you face it.
>
QUOTE(GriffGirl @ Apr 16, 2008 - 12:14 PM) [snapback]665143[/snapback]
>
That's right, the mystery bolt is behind the trim, that's why you have to remove trim bolts, so you can pull the trim out of the way. It's on the left side when you face it.


No you don't - you can get to it just takes some careful stretching wink.gif

ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI]PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYOSUSP: Tein/Bilstein/SusTech/INT: SS-III SEATS/Toyota Hyper SportsEXT: WRC/TRD/404QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)Its a safety feature so that people like you don't end up killing themselves or everyone around them.Slow down Paul Walker.6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url]
>
QUOTE(DEATH @ Apr 16, 2008 - 1:17 PM) [snapback]665146[/snapback]
>
>
QUOTE(GriffGirl @ Apr 16, 2008 - 12:14 PM) [snapback]665143[/snapback]
>
That's right, the mystery bolt is behind the trim, that's why you have to remove trim bolts, so you can pull the trim out of the way. It's on the left side when you face it.


No you don't - you can get to it just takes some careful stretching wink.gif


if you stretch 10 year old plastics, you gotta be careful tough....

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
Ok I tried taking it off yesterday but the bottom right part of the glove box side panel seems to be attached witha screw where the bottom panel under the door is. Hard to explain I'll try a diagram xD

* _____*______*
l---------------------l
l---------------------l
l------glovebox----l
l---------------------l
l---------------------l
l____________--l
*------------------(*) Possible screw here?

The stars are all the screws I've found so far and the one in parenthesis is the one that I think is there but is hidden by a panel. I'll take pics when I get home from school.

**on a side note, everything seems to be breaking down! I had to shower this morning in pitch black darkness because the electricity went out kindasad.gif I tried the breakers and everything but in the end we had to call an electrician xD

This post has been edited by emachine: Apr 17, 2008 - 10:45 AM
>
QUOTE(emachine @ Apr 17, 2008 - 11:39 AM) [snapback]665527[/snapback]
>


* _____*______*
l---------------------l
l---------------------l
l------glovebox----l
l---------------------l
l---------------------l
l____________--l
*------------------(*) Possible screw here?


yes thats the part that you take the trim out to discover a screw!!

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
could you explain in more detail what parts of the trim I need to remove? because I tried lifting up the trim it wont come off.. kindasad.gif
I took off the glove box successfully and it was just the blower motor wire being loose. Thanks for the help guys!