im doing the gt four conversion but i wanted to cut my crashbar so that the gtfour bumper fits
long time ago a member posted pretty detailed info on it, but i could not find it.
si i wanted to know if some one could tell me were to cut and how.
here is a pic of the crash bar

Joe,

If you lay the old crashbar inside of the new bumper, you'll see why it does not fit. You'll end up having to basically cut off the bottom two of the three horizontal sections, as well as cutting an angle into both the edges. Its pretty thick aluminum, and so it would take a while with a hacksaw. I would recommend just getting someone who has a good metal cutter to help you out. I can upload pictures later of mine (I ended up getting the real gt4 crashbar about 6 months after I did the conversion, so the cut-up one is sitting in my garage.)

Let me know if you want the pictures.

>

ok great,,
one user posted images but he only cut one section,,,,
please send me your pics to check them out,
also how much did you paide for the gt four crash bar?

The thread you're looking for is right here.

http://www.6gc.net/forums/index.php?showtopic=57018&hl=

>

thanks a lot, but i already looked at that thread, and the problem was that if i cut the crash bar like his, the gt four fog lights wont be able to be hold by the crash bar, he was using different fogs, thats why his method worked,,
or where else can the fog lights be mounted?

>
no matter how you cut the stock bar, the st-205 fogs will not just mount to it. you will need to custom locate and mount them yourself.
lagos has pics of his front end. PM him.

>

thanks, will try contacting him!

>


Its actually really easy to cut. I did mine with a jig saw and a metal blade. It cut through it like butter.

>
I paid $250 for the crashbar + fogs

do you still need the pics, or no?

This post has been edited by ScoobyDooCruiser: Apr 28, 2008 - 3:04 PM

>

yeah if you can please,
i would really like to see your pics