Hey guys.. I remember a while back a few of you guys were putting on the 7th gen short shifter into your cars. There were some modifications you had to do and i remember there was a how to (I think) but i can't seem to find it anywhere. If you guys have the info let me know. thanx
can someone help me... - 6G Celicas Forums
http://members.cox.net/newportspeed722/199...on%20Manual.pdf
also in step 6, it says you don't need to worry about breaking the clip... well you need that clip. i almost threw mine away. and you also have to put spacers under the assembly. other than that, just follow directions.
This post has been edited by j0e_p3t: Apr 24, 2008 - 3:27 AM
also in step 6, it says you don't need to worry about breaking the clip... well you need that clip. i almost threw mine away. and you also have to put spacers under the assembly. other than that, just follow directions.
This post has been edited by j0e_p3t: Apr 24, 2008 - 3:27 AM
ss-iii splitters and 404 skirts areon. which means i need to update my sig.
Thats for a TMW short shifter... Im talking about the one from the 7th gen celica... I remember you had to use a dremel to grind somewhere but can't remember where, its been a while back when someone did this.
>
i did not dremel anything.
what i did is instead of using the spacers they gave me, i used 4 washers in each bolt. Check the stickies too in the electrical section.
QUOTE(blackbullet @ Apr 24, 2008 - 12:42 PM) [snapback]667688[/snapback]
>
Thats for a TMW short shifter... Im talking about the one from the 7th gen celica... I remember you had to use a dremel to grind somewhere but can't remember where, its been a while back when someone did this.
Thats for a TMW short shifter... Im talking about the one from the 7th gen celica... I remember you had to use a dremel to grind somewhere but can't remember where, its been a while back when someone did this.
i did not dremel anything.
what i did is instead of using the spacers they gave me, i used 4 washers in each bolt. Check the stickies too in the electrical section.
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
i didn't need to modify anything on mine either. no rubbing at all.
Call me a traitor! See if I care. ;)
I went about not using the spacers. Does it prevent the stick from being notchy during shifts? I just figured it wasn't a big deal if I went without the spacers. I guess I will put them in and see what the differences are.
98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!
>
same exact directions i used for my 7gc ss.
QUOTE(blackbullet @ Apr 24, 2008 - 9:42 AM) [snapback]667688[/snapback]
>
Thats for a TMW short shifter... Im talking about the one from the 7th gen celica... I remember you had to use a dremel to grind somewhere but can't remember where, its been a while back when someone did this.
Thats for a TMW short shifter... Im talking about the one from the 7th gen celica... I remember you had to use a dremel to grind somewhere but can't remember where, its been a while back when someone did this.
same exact directions i used for my 7gc ss.
ss-iii splitters and 404 skirts areon. which means i need to update my sig.
Thanks alot guys... i found it in the electronic tread... thanks
>
this is what i talked about, used washers instead of the spacers. but its your option
QUOTE(blackbullet @ Apr 25, 2008 - 2:06 AM) [snapback]667957[/snapback]
>
Thanks alot guys... i found it in the electronic tread... thanks
Thanks alot guys... i found it in the electronic tread... thanks
this is what i talked about, used washers instead of the spacers. but its your option
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.