Lets say we mount a supercharger like this one in the celica running off an accessory belt. supercharger

what does those vaccuum lines and hoses do?

i think those are oil lines

SC's are lubricated with oil just like turbos

if that is a SC12 or SC14, which it looks like, then the oil is self contained, and those are vaccum lines. takes a special supercharger oil. >>

-John-

so no takers on what those lines do?

oops!
See next post...

This post has been edited by vphmc: Sep 8, 2003 - 6:59 PM

The vacuum lines most likely fit to either the manifold or head of the motor.

I reckon you'd be better off going for a
- Rotrex
(http://cgi.ebay.co.uk/ws/eBayISAPI.dllViewItem&rd=1&category=32094&item=2430530373 ),
- ProCharger
(http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2430698182&category=33741&rd=1)
- Vortech
(http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2430697935&category=33741&rd=1)
type SC and modifying it to run off the crankshaft drive pulley with custom piping.

As I do not have AC this is what I'm thinking of doing.

This post has been edited by vphmc: Sep 8, 2003 - 7:02 PM

gimme a little while to look it up, BUT, which SC is that? so i know what to look for?

-John-

i think a supercharger on a 7a-fe or 5s-fe would not be cost effective.

most of them cost around $2,000 or more. you can get a 4agze clip for around 1500.

you can get a st185 clip for 1500

the wiring send to mike at topshelfracing.com Aim screename Qatar11 he will do it for 450.

-Mynzeyes+Sep 8, 2003 - 11:58 PM

back from the dead..

I think i really am gonna do it.

I think i'm gonna make a custom bracket to mount the SC12 supercharger from a 4agze on the 7afe.

You ask me why? well the sc12 is cheap. It has a built in bypass valve to ensure you dont boost past 8psi. Its has a clutch so it can be spinning freely when you are driving normally.

Anyone have any comments?

Kwanza26?

I like turbos better ne ways