I have a 95 celica and im looking for clear sides and turns. i found the sides on ebay http://cgi.ebay.com/ebaymotors/94-99-TOYOT...sspagenameZWDVW but i cant find the front clear urns for my car. is there a differnece between the lights from a 95, and a 96 and up? Thanks for the help.
Help on clear sides and turns - 6G Celicas Forums
yea there is.. i tried from a friends 99 and the shape is different
QUOTE(thespacepanda @ Feb 21, 2008 - 4:37 PM) [snapback]644164[/snapback]When I worked for Pizza Hut our store won a health code violation.
That sucks. On ebay the have every year but a 95.
>
im thinking we gotta go custom...
QUOTE (Athorn @ Jun 22, 2008 - 10:40 PM) 
>That sucks. On ebay the have every year but a 95.
im thinking we gotta go custom...
QUOTE(thespacepanda @ Feb 21, 2008 - 4:37 PM) [snapback]644164[/snapback]When I worked for Pizza Hut our store won a health code violation.
So the 94's and earlier wont fit either? Thats wierd.
well the 94-95 will fit eachother.. but its the 96-99 that doesnt fit ours
QUOTE(thespacepanda @ Feb 21, 2008 - 4:37 PM) [snapback]644164[/snapback]When I worked for Pizza Hut our store won a health code violation.
the only way to get clear turns on the pre-facelift (94-95 front bumper cover) is to custom make some yourself or buy new lenses from wolfie (member on the site). granted they are kinda pricey but he custom makes them and they are oem quality if not better. a lot of members have them. some people have put 5th gen clear signals in but they don't really fit flush.
Call me a traitor! See if I care. ;)
makin my own 
I don't normally drive fast, but when I do its on a curvy section of this island
Or convert to the bumper 
QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM)Via FB: fcuking awsome!!! D-man FTW!QUOTE (DEATH @ Nov 11, 2008 - 5:40 PM)Damn D-Man - most impressive.QUOTE (99GT @ Nov 14, 2008 - 4:04 PM)D-Man's post should be a stickyQUOTE (samir0189 @ Nov 4, 2008 - 10:50 AM)LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts.
Sorry if its a dumb question but is the only diffrence between the 94,95 and 96 and up just how the turn signals fit or do they look diffrent.
5th gen turns will fit 94-95 bumpers. Yes, the bumper is different than the "facelift" bumper, which is 96-99.
These are for a 5th gen but will fit our car:
http://cgi.ebay.com/ebaymotors/90-93-TOYOT...Q2em118Q2el1247
You can also search "Turn Signal" for 199-1993 Toyota Celica in eBay motors, it returned about 20 listings
This post has been edited by GriffGirl: Jun 23, 2008 - 11:29 AM
These are for a 5th gen but will fit our car:
http://cgi.ebay.com/ebaymotors/90-93-TOYOT...Q2em118Q2el1247
You can also search "Turn Signal" for 199-1993 Toyota Celica in eBay motors, it returned about 20 listings
This post has been edited by GriffGirl: Jun 23, 2008 - 11:29 AM
As goferris kindly pointed out, the only way to get a true OEM look/style is to fit my clear lenses which are a near perfect copy of the originals.
They aren't cheap as they're individually hand cast and then oven cured before trimming,finishing and polishing.
You might be interested in this pair on eBay.....
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...E:IT&ih=009
Richard
www.protocast.co.uk
They aren't cheap as they're individually hand cast and then oven cured before trimming,finishing and polishing.
You might be interested in this pair on eBay.....
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...E:IT&ih=009
Richard
www.protocast.co.uk
Has your car ever been on T.V? Mine was used in the opening sequences here - note the clear turns and front LED'shttp://videos.streetfire.net/video/Wheeler...11-9c0f00a0b820
^ Those are by far the best option, IMO if you have the budget.
I just put in my bid...Hope I end up winning bc these are the best that i've seen.
facebookWRC st205
i cn vouch for the quality of these heres a pic fitted you wont tell the difference from oem 
>
u better hurry up so i can see them!!!!
QUOTE (808celica @ Jun 23, 2008 - 1:41 AM)
>makin my own
u better hurry up so i can see them!!!!
BANNED. for life, you moron.
>
i just need epoxy to seal them up. they're not wolfie quality but it'll have to do. after all my 6gc project is all about the DIY
QUOTE (CelicaST_CALI @ Jun 24, 2008 - 10:17 AM)
>>
u better hurry up so i can see them!!!!
QUOTE (808celica @ Jun 23, 2008 - 1:41 AM)
>makin my own
u better hurry up so i can see them!!!!
i just need epoxy to seal them up. they're not wolfie quality but it'll have to do. after all my 6gc project is all about the DIY
I don't normally drive fast, but when I do its on a curvy section of this island
i gotta see this b4 i go and place a bid
1995 GT::::Diffusing the Situationエキサイティングカーレーシングチーム!march2010 COTM:6GCfeature2014:january2015-2016-2018 COTM
ahhaha tiga VS shannon round one!!!!
BANNED. for life, you moron.
>
>>see what man???>>
for you athorn just in case you wanna try to make your own
This post has been edited by 808celica: Jun 24, 2008 - 9:10 PM
QUOTE (Tigawoods @ Jun 24, 2008 - 12:11 PM)
>i gotta see this b4 i go and place a bid
>>see what man???>>
for you athorn just in case you wanna try to make your own
This post has been edited by 808celica: Jun 24, 2008 - 9:10 PM
I don't normally drive fast, but when I do its on a curvy section of this island
wait,did u have turns when i saw it....i didnt look lol
BANNED. for life, you moron.
To me the amber is nicer. Its JDM style. Plus the clear ones you make yourself don't look as good as the 96 to 99's.
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
>
no i didnt i wish i did but i didnt have any adhesive substance to use
yes the amber looks nice but it would hurt to have clears. especially when i got the signal housings free
QUOTE (CelicaST_CALI @ Jun 24, 2008 - 6:52 PM)
>wait,did u have turns when i saw it....i didnt look lol
no i didnt i wish i did but i didnt have any adhesive substance to use
yes the amber looks nice but it would hurt to have clears. especially when i got the signal housings free
I don't normally drive fast, but when I do its on a curvy section of this island
>
One tip regards removing the lenses, I'd suggest only putting one unit in the oven at a time, and placing them on an oven glove rather than a metal tray to reduce chance of damage. When refitting my clears, no extra adhesive is required as they are the exact shape and priofile that they fit perfect using the original mastic left in the groove round the edge.It's a good idea to thoroughly wash the units in warm soapy water and using a small flat screwdriver, poke the remaining mastic evenly down into the channel all round.
If you're as fussy as me, you might like to mask off the edgewith the mastic in and then chrome spray the reflector which will probably look rather dull. This brightens the whole look of the unit and is well worth the trouble IMHO.
I'm just finishing a couple of pairs so I'll post a close up pic later so you can see the detail
QUOTE (808celica @ Jun 25, 2008 - 10:09 AM)
>>
no i didnt i wish i did but i didnt have any adhesive substance to use
yes the amber looks nice but it would hurt to have clears. especially when i got the signal housings free
QUOTE (CelicaST_CALI @ Jun 24, 2008 - 6:52 PM)
>wait,did u have turns when i saw it....i didnt look lol
no i didnt i wish i did but i didnt have any adhesive substance to use
yes the amber looks nice but it would hurt to have clears. especially when i got the signal housings free
One tip regards removing the lenses, I'd suggest only putting one unit in the oven at a time, and placing them on an oven glove rather than a metal tray to reduce chance of damage. When refitting my clears, no extra adhesive is required as they are the exact shape and priofile that they fit perfect using the original mastic left in the groove round the edge.It's a good idea to thoroughly wash the units in warm soapy water and using a small flat screwdriver, poke the remaining mastic evenly down into the channel all round.
If you're as fussy as me, you might like to mask off the edgewith the mastic in and then chrome spray the reflector which will probably look rather dull. This brightens the whole look of the unit and is well worth the trouble IMHO.
I'm just finishing a couple of pairs so I'll post a close up pic later so you can see the detail
Has your car ever been on T.V? Mine was used in the opening sequences here - note the clear turns and front LED'shttp://videos.streetfire.net/video/Wheeler...11-9c0f00a0b820
>
thanks wolfie. yeah i did heat up each housing one at a time i just too the pic after i was done. i also did spray the housing with chrome rattle can and just for fun i glue some aluminum foil inside to sort of give a more reflective image. thanks for the advice wolfie
QUOTE (wolfie308 @ Jun 24, 2008 - 11:25 PM)
>>
One tip regards removing the lenses, I'd suggest only putting one unit in the oven at a time, and placing them on an oven glove rather than a metal tray to reduce chance of damage. When refitting my clears, no extra adhesive is required as they are the exact shape and priofile that they fit perfect using the original mastic left in the groove round the edge.It's a good idea to thoroughly wash the units in warm soapy water and using a small flat screwdriver, poke the remaining mastic evenly down into the channel all round.
If you're as fussy as me, you might like to mask off the edgewith the mastic in and then chrome spray the reflector which will probably look rather dull. This brightens the whole look of the unit and is well worth the trouble IMHO.
I'm just finishing a couple of pairs so I'll post a close up pic later so you can see the detail
QUOTE (808celica @ Jun 25, 2008 - 10:09 AM)
>>
no i didnt i wish i did but i didnt have any adhesive substance to use
yes the amber looks nice but it would hurt to have clears. especially when i got the signal housings free
QUOTE (CelicaST_CALI @ Jun 24, 2008 - 6:52 PM)
>wait,did u have turns when i saw it....i didnt look lol
no i didnt i wish i did but i didnt have any adhesive substance to use
yes the amber looks nice but it would hurt to have clears. especially when i got the signal housings free
One tip regards removing the lenses, I'd suggest only putting one unit in the oven at a time, and placing them on an oven glove rather than a metal tray to reduce chance of damage. When refitting my clears, no extra adhesive is required as they are the exact shape and priofile that they fit perfect using the original mastic left in the groove round the edge.It's a good idea to thoroughly wash the units in warm soapy water and using a small flat screwdriver, poke the remaining mastic evenly down into the channel all round.
If you're as fussy as me, you might like to mask off the edgewith the mastic in and then chrome spray the reflector which will probably look rather dull. This brightens the whole look of the unit and is well worth the trouble IMHO.
I'm just finishing a couple of pairs so I'll post a close up pic later so you can see the detail
thanks wolfie. yeah i did heat up each housing one at a time i just too the pic after i was done. i also did spray the housing with chrome rattle can
and just for fun i glue some aluminum foil inside to sort of give a more reflective image. thanks for the advice wolfie
I don't normally drive fast, but when I do its on a curvy section of this island
I REALLY recommend those side marker lights from "neondials" I just ordered mine from him off eBay a few weeks ago and installed them...they look great and the packaging I got them in were awesome. Heres a pic of my car with them installed, sorry for size, but its a great wallpaper if you want my car on your desktop
1997 Toyota Celica GT Hatchback- Sold :(2000 Toyota Celica GT- Sold :(1997 Lexus SC400- Daily :D
here's an old pic of my celica with Wolfie's clear turn lenses:
wait what?? i thought yours were smoked ambers??
I don't normally drive fast, but when I do its on a curvy section of this island
Oh I still have the smoke-tinted amber turn signals in the storage. But I installed Wolfie's clear turns almost a year now.
wolfie oem perfection:
Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor